BlieSMa T25B-6 25mm Berylium dome tweeter 6 Ohm
BlieSMa T25B-6 25mm Berylium dome tweeter 6 Ohm
BlieSMa T25B-6 25mm Berylium dome tweeter 6 Ohm
    BlieSMa T25B-6 25mm Berylium dome tweeter 6 Ohm
    BlieSMa T25B-6 25mm Berylium dome tweeter 6 Ohm
    BlieSMa T25B-6 25mm Berylium dome tweeter 6 Ohm

    BlieSMa T25B-6 25 mm Berylium dome tweeter 6 Ohm

    SHIPMENT IN 10 WORKING DAYS
    €369.00
    Tax included
    rating No review at the moment

    BlieSMa T25B-6 25mm Berylium dome tweeter 6 Ohm

    The measurements of a pre-production sample of the BlieSMa T25B-6 tweeter.

    The THD measurements at distance of 315 mm and voltage levels 2 - 11.2 Volt were carried out with High Pass Filter "on" (2nd order Butterworth type, 800 Hz cutoff, HPF2-800)​

    The minimum purchase order quantity for the product is 2.

    Estimated Shipping Costs
    Shipping Costs
    €18.00
    Shipping Time
    .
    Want to check another country or courier?

     

    BlieSMa T25B-6 25mm Berylium dome tweeter 6 Ohm

    - PRICE FOR 1 PIECE -

    The measurements of a pre-production sample of the BlieSMa T25B-6 tweeter.

    The THD measurements at distance of 315 mm and voltage levels 2 - 11.2 Volt were carried out with High Pass Filter "on" (2nd order Butterworth type, 800 Hz cutoff, HPF2-800)​

    Characteristics :

    • 25 mm beryllium lens.
    • heavily damped membrane resonance only at about 35kHz in ultrasound
    • Extremely low moving mass for improved dynamics, response and higher efficiency
    • Fully saturated copper-capped neodymium motor for low non-linear distortion and exceptionally low intermodulation distortion 2 mm linear excursion and large vent channel for undistorted reproduction at low frequencies
    • Narrow surround for less tone coloration through soft elements.
    • Sound generation only through the up to 35kHz rigid beryllium membrane
    • Flush-mounted surround and rear-mounted magnet system for a flat frequency response and a wide off-axis response.
    • No ferrofluid for improved dynamics
    • Copper-coated aluminum underhung voice coil on titanium bobbin
    • Flexible and lightweight connection wires, made in Denmark
    • Thick powder coated aluminum flange
    • Aluminum rear chamber with natural wool damping gold plated wire connectors recommended frequency range 2.2kHz-40kHz

    Specifications :

    • Nominal Impedance: 6Ω
    • Rated power* 100 W
    • Sensitivity 2.83V/1m 94dB
    • Net weight 0.23kg
    • Effective piston area, Sd 5.7 cm²
    • Moving mass, Mms 0.10 g
    • Force factor, Bl 2.6 T*m
    • Resonant frequency, Fs 1050 Hz
    • Mechanical Q factor, Qms 1.35
    • Electrical Q factor, Qes 0.82
    • Overall Q-factor, Qts 0.51
    • Magnetic flux density 2.0 T
    • Air gap height 3 mm
    • Linear deflection (p-p) 2 mm
    • Voice coil diameter 24 mm
    • Voice coil height 1.0 mm voice coil layers 2
    • Voice coil inductance, Le 0.008 mH
    • DC resistance, Re 5.2 Ω
    • Wire material CCAW
    • * IEC 268-5, 2nd order high-pass Butterworth filter, 2.5 kHz
    BlieSMa T25B-6
    4 Items

    You might also like

    Product added to wishlist
    Product added to compare.