Audaphon WaveLine 152 MK2 floorstanding loudspeaker from Hobby Hifi 5/2018
Audaphon WaveLine 152 MK2 floorstanding loudspeaker from Hobby Hifi 5/2018

Audaphon WaveLine 152 MK2 floorstanding loudspeaker from Hobby Hifi 5/2018

Audaphon WaveLine 152 MK2 floorstanding loudspeaker from Hobby Hifi 5/2018

Kit without housing, price per speaker

Waveline 152 MK2 is a two-way floorstanding loudspeaker. Waveline 152 MK2 is a transmission line loudspeaker with chassis from Audaphon and Wavecor.

SHIPMENT IN 7-10 WORKING DAYS
€721.00
Tax included
rating No review at the moment

Estimated Shipping Costs
Shipping Costs
€46.80
Shipping Time
.
Want to check another country or courier?

You might also like

 

Audaphon WaveLine 152 MK2 floorstanding loudspeaker from Hobby Hifi 5/2018

Kit without housing, price per speaker

Waveline 152 MK2 is a two-way floorstanding loudspeaker. Waveline 152 MK2 is a transmission line loudspeaker with chassis from Audaphon and Wavecor. The loudspeaker contains the following loudspeaker chassis: - an air motion transformer (ribbon tweeter) Audaphon AMT 2i - a mid-woofer Wavecor WF152CU13 The crossover consists of: - a 3rd order high pass (18 dB / octave) for the tweeter. - a 3rd order low pass (18 dB / octave) for the woofer. The frequency response of the loudspeaker is perfectly linear. The decay spectrum (waterfall diagram) is exemplary without any disturbing resonance. The non-linear distortions remain almost consistently below 1% at 90 dB (1m) above 200 Hz.

Technical data:

  • Impedance: 8 Ohm
  • Sound pressure level (2.83V/1m): 82 dB
  • Dimensions (HxWxD): 979 x 190 x 280 mm
  • Frequency range (-8dB): 32 - 33000 Hz
  • Crossover frequency(s): 3000 Hz
  • Principle: Transmission line box

Highlights

  • Air-Motion-Transformer Audaphon AMT-2i
  • WF152CU13 Wavecor mid-woofer, 8 Ohm, fiberglass, BD, phase plug
  • Insulating material Sonofil 100 x 35 cm for 20 liters
  • 0.5x Audaphon Damping 10, 970 x 470 mm, self-adhesive
  • Pole terminals PK31, one pair, gold-plated, red+black
  • 2m speaker cable 2x2.5 mm2, transparent
  • 0.5x pan screws 3.5x17 black, 8 pieces
  • Construction plan for the kit the crossover components (right), to be assembled on a wooden board.
  • Mundorf MCAP EVO oil 2.7 μF / 450 V
  • Mundorf MCAP EVO oil 8.2 μF / 450 V
  • ClarityCap PWA capacitor 33 μF / 160 Vdc
  • Audaphon MKP CAP Superior 10 μF / 400 Vdc
  • Mundorf baked varnish air coil BL71, 0.27 mH/0.45 Ohm
  • Mundorf baked varnish air coil BL140, 0.82 mH/0.26 Ohm
  • Mundorf baked varnish air coil BL140, 1.2 mH/0.34 Ohm
  • Metal oxide resistor MOX10 3.9 Ohm (orange-white-gold)
  • Metal oxide resistor MOX10 5.6 Ohm (green-blue-gold)
  • Metal oxide resistor MOX5 6.8 Ohm (blue-gray-gold)

Audaphon WaveLine 152 MK2
2 Items

You might also like

CVS10C - OFC speaker cable 2x1.0mm² - white sheath CVS10C - OFC speaker cable 2x1.0mm² - white sheath 2
SHIPMENT IN 5/7 WORKING DAYS
Speakers Cables for Home HIFI

SPEAKERS CABLE CVS25C - OFC 2x2.5mm² - white sheath

XPL
CVS25C
rating 0 review
€2.59
SPEAKERS CABLE CVS25C - OFC  2x2.5mm² - white sheath Bipolar OFC copper cable for 2x2.5mm² speakers composed of 7 braids with 32 wires each of 0.12mm. External dimensions: 3.8x7.6mm. Available in 50m and 100m air-wound rolls. Excellent quality .. Price per linear meter. Technical features Cable type Double wire speaker Cross section Cable 25 mm Cable...
Dayton Audio BR-1 2-Way Bookshelf Monitor Speaker Dayton Audio BR-1 2-Way Bookshelf Monitor Speaker 2
  • On sale!
  • -10%
SHIPMENT IN 7-10 WORKING DAYS
DIY speaker kit

Dayton Audio BR-1 2-Way Bookshelf Monitor Speaker

Dayton Audio
BR-1
rating 0 review
€386.10 €429.00
Dayton Audio BR-1 2-Way Bookshelf Monitor Speaker Kits, Pair highlights Inexpensive, easy-to-build 2-way system for the novice speaker builder Includes everything you need to build a pair Perfect introduction to the theory, construction and soldering of loudspeakers The fully finished case allows this kit to be completed in a few hours

16 other products in the same category:

Audaphon Athena floorstanding speakers Kit with high-end crossover
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Audaphon Athena floorstanding speakers Kit with high-end crossover

Audaphon
Audaphon Athena
rating 0 review
€1,446.00
Audaphon Athena floorstanding speakers Kit with high-end crossover Kit with high-end crossover without housing, price per speaker The high-end kit is equipped with baked varnish coils in the important places to reduce the microphonic effect (the current through the coil generates a magnetic field, which in turn sets the winding in motion.
Tang Band Cobra-Horn 2 floorstanding loudspeakers from Hobby Hifi 5/2017
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Tang Band Cobra-Horn 2 floorstanding loudspeakers from Hobby Hifi 5/2017

Tang Band
Cobra-Horn 2
rating 0 review
€277.00
Tang Band Cobra-Horn 2 floorstanding loudspeakers from Hobby Hifi 5/2017 Kit without housing price per speaker Cobra-Horn 2 is a floor-standing loudspeaker with a broadband loudspeaker. Cobra-Horn 2 is a horn loudspeaker with a back-loaded hyperbolic horn with a chassis from Tang Band. The loudspeaker was developed by Bernd Timmermanns. 
Monacor HiFi-PA 2x8/2 floorstanding speakers Kit with high-end crossover
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Monacor HiFi-PA 2x8/2 floorstanding speakers Kit with high-end crossover

MONACOR
Monacor HiFi-PA 2x8/2
rating 0 review
€512.00
Monacor HiFi-PA 2x8/2 floorstanding speakers Kit with high-end crossover Kit with high-end crossover without housing price per speaker The high-end kit is equipped with baked varnish coils in the important places to reduce the microphonic effect (the current through the coil generates a magnetic field, which in turn sets the winding in motion. 
Monacor Bodega floorstanding speakers Kit with high-end crossover from Hobby HiFi
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Monacor Bodega floorstanding speakers Kit with high-end crossover from Hobby HiFi

MONACOR
Monacor Bodega
rating 0 review
€386.00
Monacor Bodega floorstanding speakers Kit with high-end crossover from Hobby HiFi Kit with high-end crossover without housing price per speaker The high-end kit contains Clarity Cap SA 630V capacitors for the tweeter. All coils are designed as baked varnish air coils to reduce the microphonic effect (the current through the coil generates a magnetic...
Excel Orkla floorstanding speakers from K+T 4/2021
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Excel Orkla floorstanding speakers from K+T 4/2021

seas
Excel Orkla
rating 0 review
€1,154.00
Excel Orkla floorstanding speakers from K+T 4/2021 Kit without housing price per speaker Orkla is a three-way floorstanding loudspeaker. Orkla is a bass reflex loudspeaker with chassis from SB Acoustics, Seas and Alcone. The loudspeaker contains the following chassis: - a beryllium tweeter SB Acoustics SATORI-TW29B - a midrange speaker Seas Excel W18EX001...
Tang Band Flat 8
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Tang Band Flat 8 floorstanding loudspeakers Kit with high-end crossover

Scan Speak
Flat 8
rating 0 review
€481.00
Tang Band Flat 8 floorstanding loudspeakers Kit with high-end crossover Kit with high-end crossover without housing price per speaker The high-end kit is equipped with baked enamel coils in the important places to reduce the microphonic effect (the current through the coil generates a magnetic field, which in turn sets the winding in motion. 
Tang Band Dschinn Mini-TL 2.5 floorstanding loudspeaker Kit with high-end crossover
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Tang Band Dschinn Mini-TL 2.5 floorstanding loudspeaker Kit with high-end crossover

Scan Speak
Dschinn Mini-TL 2.5
rating 0 review
€302.00
Tang Band Dschinn Mini-TL 2.5 floorstanding loudspeaker Kit with high-end crossover Kit with high-end crossover without housing price per speaker The high-end kit is equipped with baked varnish coils in the important places to reduce the microphonic effect (the current through the coil generates a magnetic field, which in turn sets the winding in motion....
Scan Speak Silenos
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Scan Speak Silenos floorstanding loudspeakers from K+T magazine 1/2019

Scan Speak
Scan-FAST
rating 0 review
€406.00
Scan Speak Silenos floorstanding loudspeakers from K+T magazine 1/2019 Kit without housing price per speaker Silenos is a three-way floor-standing loudspeaker. Silenos is a bass reflex loudspeaker with a Scan-Speak chassis. The loudspeaker contains the following loudspeaker chassis: - a Scan-Speak R2604/832000 tweeter - a Scan-Speak 12W-4524G00 midrange...
Celestion Hotan PA speakers Kit with high-end crossover
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Celestion Hotan PA speakers Kit with high-end crossover

Celestion
Celestion Hotan
rating 0 review
€1,427.00
Celestion Hotan PA speakers Kit with high-end crossover Kit with high-end crossover without housing, price per box The high-end kit is equipped with copper foil and baked enamel coils in the important places to reduce the microphonic effect (the current through the coil generates a magnetic field, which in turn sets the winding in motion.
Product added to wishlist
Product added to compare.