Audaphon Sculptor floorstanding loudspeakers Kit with high-end crossover

Name: Audaphon Sculptor floorstanding loudspeakers Kit with high-end crossover
Brand: Audaphon
SKU: Audaphon Sculptor
Price: 2677 EUR
Availability: InStock

Audaphon Sculptor floorstanding loudspeakers Kit with high-end crossover

Kit with high-end crossover without housing, price per speaker

SHIPMENT IN 7-10 WORKING DAYS

€2,677.00

Tax included

No review at the moment

Estimated Shipping Costs

Shipping Costs

€60.00

Shipping Time

Want to check another country or courier?

Audaphon Sculptor floorstanding loudspeakers Kit with high-end crossover

Kit with high-end crossover without housing, price per speaker

1.717 / 5.000

Sculptor is a three-way floorstanding loudspeaker. Sculptor is a closed loudspeaker with chassis from Audaphon and Wavecor. The loudspeaker contains the following loudspeaker chassis: - a ribbon tweeter Audaphon APR 1.0 - two midrange speakers Wavecor WF152CU14 - four woofers Wavecor SW223BD02 .The crossover consists of: - a 3rd order high pass (18 dB / octave) for the tweeter. - a band pass consisting of a 2nd order high pass (12 dB / octave) and a 2nd order low pass (12 dB / octave) for the midrange woofers. - a 2nd order low pass (12 dB / octave) for the woofers. The frequency response of the loudspeaker is perfectly linear. The decay spectrum is almost flawless. The non-linear distortions at low volumes (85 dB, 1 m) are below 0.3% above 500 Hz and remain below 0.4% in the audible range even at higher levels (95 dB, 1 m). At low levels (85 dB, 1 m) Sculptor even shows exceptionally low distortions in the frequency range from 600 Hz, which almost never exceed 0.1%, which is absolutely top class.

The high-end kit is equipped with baked enamel coils in the important places to reduce the microphonic effect (the current through the coil generates a magnetic field, which in turn sets the coil in motion. This movement induces voltages in the coil, which are added to the useful signal. The tighter the coil is wound, the less the useful signal is distorted.) The capacitors for the Audaphon APR 1.0 - where quality is particularly important - are high-quality Clarity Cap CSA MKP capacitors with 630 V and 250 V.

Technical data:

Impedance: 4 Ohm
Sound pressure level (2.83V/1m): 88 dB
Dimensions (HxWxD): 1500 x 280 x 410 mm
Frequency range (-8dB): 30 - 38000 Hz
Crossover frequency(s): 210, 1900 Hz
Principle: closed box

Highlights

Audaphon AC Aluminium Ribbon Tweeter APR 1.0
2x WF152CU14, Wavecor woofer, 8 Ohm, paper, BD, phase plug
4x Wavecor SW223BD02, 4 Ohm, subwoofer with cast basket
3x insulation fleece MT Bondum 800 (30 x 50 x 2 cm)
4x insulation material Sonofil 100 x 35 cm for 20 liters
Pole terminals PK28 I Ni, one pair, nickel-plated, red+black
5m speaker cable 2x1.5 mm2 black/red
Pan screws 3.5x17 black, Torx, 8 pieces
4x pan screws 4x20 black, Torx, 8 pieces
Construction plan for the kit the crossover components (right), to be assembled on a wooden board.
ClarityCap PWA capacitor 2.2 μF / 160 Vdc
ClarityCap PWA capacitor 4.7 μF / 160 Vdc
ClarityCap PWA capacitor 33 μF / 160 Vdc
ClarityCap PWA capacitor 82 μF / 160 Vdc
ClarityCap CSA capacitor 0.33uF / 630 Vdc
ClarityCap CSA capacitor 3.9uF / 630 Vdc
ClarityCap CSA capacitor 8.2uF / 250 Vdc
Electrolytic capacitor rough, 150 μF/63 Vdc
Mundorf baked varnish air coil BL71, 0.68 mH/0.71 Ohm
Mundorf baked varnish air coil BL140, 0.82 mH/0.26 Ohm
Mundorf baked varnish air coil BL71, 0.068 mH/0.18 Ohm
Mundorf BS140 core coil 4.7mH/0.24Ohm
Mundorf H core baked enamel coil BH71, 3.3 mH/0.47 0hm
Mundorf H core baked enamel coil BH71, 4.7 mH/0.55 0hm
2x metal oxide resistor MOX10 4.7 Ohm (yellow-violet-gold)
Metal oxide resistor MOX10 6.8 Ohm (blue-gray-gold
) 2x metal oxide resistor MOX10 10 Ohm (brown-black-black)