Audaphon Facette AM floorstanding loudspeaker from Hobby Hifi 4/2017
Audaphon Facette AM floorstanding loudspeaker from Hobby Hifi 4/2017

Audaphon Facette AM floorstanding loudspeaker from Hobby Hifi 4/2017

Audaphon Facette AM floorstanding loudspeaker from Hobby Hifi 4/2017

Kit without housing, price per speaker

Facette AM is a two-way floorstanding loudspeaker. Facette AM is a bass reflex loudspeaker. Facette AM is a high-quality loudspeaker with chassis from Audaphon and Wavecor, in which a passive membrane guarantees deep bass for bass tuning.

SHIPMENT IN 7-10 WORKING DAYS
€1,278.00
Tax included
rating No review at the moment

Estimated Shipping Costs
Shipping Costs
€46.80
Shipping Time
.
Want to check another country or courier?

You might also like

 

Audaphon Facette AM floorstanding loudspeaker from Hobby Hifi 4/2017

Kit without housing, price per speaker

Facette AM is a two-way floorstanding loudspeaker. Facette AM is a bass reflex loudspeaker. Facette AM is a high-quality loudspeaker with chassis from Audaphon and Wavecor, in which a passive membrane guarantees deep bass for bass tuning. The loudspeaker contains the following loudspeaker chassis: - an Air-Motion-Transformer AMT 1i - a woofer WF182CU12 The loudspeaker was developed by Bernd Timmermanns. The crossover consists of: - a 2nd order high pass (12 dB / octave) for the tweeter. - a 3rd order low pass (18 dB / octave) for the woofer. The frequency response of the loudspeaker is perfectly linear. The decay spectrum (waterfall diagram) is exemplary without any disturbing resonance. The non-linear distortions are extremely low at 90 dB (1m) sound pressure: they are less than 0.3% above 500 Hz. That is absolutely outstanding.

.

Technical data:

  • Impedance: 8 Ohm
  • Sound pressure level (2.83V/1m): 82 dB
  • Dimensions (HxWxD): 1000 x 255 x 290 mm
  • Frequency range (-8dB): 35 - 30000 Hz
  • Crossover frequency(s): 2200 Hz
  • Principle: Passive membrane

Highlights

  • Audaphon AMT-1i
  • Wavecor WF182BD10 as passive membrane
  • Wavecor WF182CU12, 8 Ohm, fiberglass, phase plug, BD, mid-woofer
  • 3x insulation fleece MT Bondum 800 (30 x 50 x 2 cm)
  • Insulation material Sonofil 100 x 35 cm for 20 liters
  • Audaphon Damping 10, 970 x 470 mm, self-adhesive
  • Pole terminals PK31, one pair, gold-plated, red+black
  • 3m speaker cable 2x2.5 mm2, transparent
  • 1.5x Allen wood screws 4x25 mm, black 8 pieces
  • Construction plan for the kit the crossover components (right), to be assembled on a wooden board.
  • ClarityCap CSA capacitor 4.7uF / 630 Vdc
  • Audaphon MKP CAP Superior 6.8 μF / 400 Vdc
  • Mundorf baked varnish air coil BL100, 0.68 mH/0.39 Ohm
  • Mundorf baked varnish air coil BL140, 0.47 mH/0.19 Ohm
  • Mundorf baked varnish air coil BL140, 2.7 mH/0.51 Ohm
  • Metal oxide resistor MOX10 2.2 Ohm (red-red-gold)
  • Metal oxide resistor MOX10 6.8 Ohm (blue-gray-gold)
Audaphon Facette AM
2 Items

You might also like

CVS10C - OFC speaker cable 2x1.0mm² - white sheath CVS10C - OFC speaker cable 2x1.0mm² - white sheath 2
SHIPMENT IN 5/7 WORKING DAYS
Speakers Cables for Home HIFI

SPEAKERS CABLE CVS25C - OFC 2x2.5mm² - white sheath

XPL
CVS25C
rating 0 review
€2.59
SPEAKERS CABLE CVS25C - OFC  2x2.5mm² - white sheath Bipolar OFC copper cable for 2x2.5mm² speakers composed of 7 braids with 32 wires each of 0.12mm. External dimensions: 3.8x7.6mm. Available in 50m and 100m air-wound rolls. Excellent quality .. Price per linear meter. Technical features Cable type Double wire speaker Cross section Cable 25 mm Cable...
Dayton Audio BR-1 2-Way Bookshelf Monitor Speaker Dayton Audio BR-1 2-Way Bookshelf Monitor Speaker 2
  • On sale!
  • -10%
SHIPMENT IN 7-10 WORKING DAYS
DIY speaker kit

Dayton Audio BR-1 2-Way Bookshelf Monitor Speaker

Dayton Audio
BR-1
rating 0 review
€386.10 €429.00
Dayton Audio BR-1 2-Way Bookshelf Monitor Speaker Kits, Pair highlights Inexpensive, easy-to-build 2-way system for the novice speaker builder Includes everything you need to build a pair Perfect introduction to the theory, construction and soldering of loudspeakers The fully finished case allows this kit to be completed in a few hours

16 other products in the same category:

Audaphon Athena floorstanding speakers from K+T 4/2022
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Audaphon Athena floorstanding speakers from K+T 4/2022

Audaphon
Audaphon Athena
rating 0 review
€1,321.00
Audaphon Athena floorstanding speakers from K+T 4/2022 Kit without housing, price per speaker Athena is a three-way floorstanding loudspeaker with very low distortion. Athena is a bass reflex loudspeaker with chassis from Audaphon and Wavecor. The loudspeaker contains the following chassis: - an air motion transformer (ribbon tweeter) 
Scan Speak Silenos
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Scan Speak Silenos floorstanding loudspeakers from K+T magazine 1/2019

Scan Speak
Scan-FAST
rating 0 review
€406.00
Scan Speak Silenos floorstanding loudspeakers from K+T magazine 1/2019 Kit without housing price per speaker Silenos is a three-way floor-standing loudspeaker. Silenos is a bass reflex loudspeaker with a Scan-Speak chassis. The loudspeaker contains the following loudspeaker chassis: - a Scan-Speak R2604/832000 tweeter - a Scan-Speak 12W-4524G00 midrange...
Excel Big King Floorstanding Speakers Kit with high-end crossover
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Excel Big King Floorstanding Speakers Kit with high-end crossover

seas
Excel Big King
rating 0 review
€3,361.00
Excel Big King Floorstanding Speakers Kit with high-end crossover Kit with high-end crossover without housing price per speaker The high-end kit is equipped with baked enamel coils in the important places to reduce the microphonic effect (the current through the coil generates a magnetic field, which in turn sets the winding in motion. 
Tang Band Cobra-Horn 2 floorstanding loudspeakers from Hobby Hifi 5/2017
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Tang Band Cobra-Horn 2 floorstanding loudspeakers from Hobby Hifi 5/2017

Tang Band
Cobra-Horn 2
rating 0 review
€277.00
Tang Band Cobra-Horn 2 floorstanding loudspeakers from Hobby Hifi 5/2017 Kit without housing price per speaker Cobra-Horn 2 is a floor-standing loudspeaker with a broadband loudspeaker. Cobra-Horn 2 is a horn loudspeaker with a back-loaded hyperbolic horn with a chassis from Tang Band. The loudspeaker was developed by Bernd Timmermanns. 
Celestion HiFi-PA 2x8/2 floorstanding speakers Kit with high-end crossover
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Celestion HiFi-PA 2x8/2 floorstanding speakers Kit with high-end crossover

Celestion
Celestion HiFi-PA 2x8/2
rating 0 review
€512.00
Celestion HiFi-PA 2x8/2 floorstanding speakers Kit with high-end crossover Kit with high-end crossover without housing, price per speaker The high-end kit is equipped with baked varnish coils in the important places to reduce the microphonic effect (the current through the coil generates a magnetic field, which in turn sets the winding in motion.
Tang Band Dschinn Mini-TL MTM floorstanding loudspeaker Kit with high-end crossover
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Tang Band Dschinn Mini-TL MTM floorstanding loudspeaker Kit with high-end crossover

Tang Band
Dschinn Mini-TL MTM
rating 0 review
€262.00
Tang Band Dschinn Mini-TL MTM floorstanding loudspeaker Kit with high-end crossover Kit with high-end crossover without housing price per speaker The high-end kit is equipped with baked varnish coils in the important places to reduce the microphonic effect (the current through the coil generates a magnetic field, which in turn sets the winding in motion. 
Audaphon Cherlen 6 dB floorstanding loudspeaker from K+T magazine 5/2015
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Audaphon Cherlen 6 dB floorstanding loudspeaker from K+T magazine 5/2015

Audaphon
Audaphon Cherlen 6 dB
rating 0 review
€1,274.00
Audaphon Cherlen 6 dB floorstanding loudspeaker from K+T magazine 5/2015 Kit without housing, price per speaker The Cherlen 6 dB is a 2-way high-end bass reflex floor-standing loudspeaker with Air Motion Transformer. It uses the excellent Audaphon AMT 1i as a tweeter and the outstanding Morel TSCM 634 as a woofer.
Alcone Otra floorstanding speakers Kit with high-end crossover
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Alcone Otra floorstanding speakers Kit with high-end crossover

Alcone Audio
Alcone Otra
rating 0 review
€635.00
Alcone Otra floorstanding speakers Kit with high-end crossover Kit with high-end crossover without housing, price per speaker The high-end kit is equipped with baked varnish coils in the important places to reduce the microphonic effect (the current through the coil generates a magnetic field, which in turn sets the winding in motion. This movement...
Audaphon Sculptor floorstanding loudspeakers Kit with high-end crossover
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Audaphon Sculptor floorstanding loudspeakers Kit with high-end crossover

Audaphon
Audaphon Sculptor
rating 0 review
€2,677.00
Audaphon Sculptor floorstanding loudspeakers Kit with high-end crossover Kit with high-end crossover without housing, price per speaker Sculptor is a three-way floorstanding loudspeaker. Sculptor is a closed loudspeaker with chassis from Audaphon and Wavecor. The loudspeaker contains the following loudspeaker chassis: - a ribbon tweeter Audaphon APR 1.0 -...
Product added to wishlist
Product added to compare.