Audaphon Sculptor fFloorstanding loudspeaker for high volume (with high-power crossover)
Audaphon Sculptor fFloorstanding loudspeaker for high volume (with high-power crossover)

Audaphon Sculptor fFloorstanding loudspeaker for high volume (with high-power crossover)

Audaphon Sculptor fFloorstanding loudspeaker for high volume (with high-power crossover)

Kit with high-power crossover without housing, price per speaker

The high-power kit is equipped with high-performance coils in the important places and contains high-quality capacitors in essential places (e.g. in front of the midrange speakers: film capacitors.

SHIPMENT IN 7-10 WORKING DAYS
€2,742.00
Tax included
rating No review at the moment

Estimated Shipping Costs
Shipping Costs
€46.80
Shipping Time
.
Want to check another country or courier?

You might also like

 

Audaphon Sculptor fFloorstanding loudspeaker for high volume (with high-power crossover)

Kit with high-power crossover without housing, price per speaker

Sculptor is a three-way floorstanding loudspeaker. Sculptor is a closed loudspeaker with chassis from Audaphon and Wavecor. The loudspeaker contains the following loudspeaker chassis: - a ribbon tweeter Audaphon APR 1.0 - two midrange speakers Wavecor WF152CU14 - four woofers Wavecor SW223BD02 .The crossover consists of: - a 3rd order high pass (18 dB / octave) for the tweeter. - a band pass consisting of a 2nd order high pass (12 dB / octave) and a 2nd order low pass (12 dB / octave) for the midrange woofers. - a 2nd order low pass (12 dB / octave) for the woofers. The frequency response of the loudspeaker is perfectly linear. The decay spectrum is almost flawless. The non-linear distortions at low volumes (85 dB, 1 m) are below 0.3% above 500 Hz and remain below 0.4% in the audible range even at higher levels (95 dB, 1 m). At low levels (85 dB, 1 m) Sculptor even shows exceptionally low distortions in the frequency range from 600 Hz, which almost never exceed 0.1%, which is absolutely top class.
The high-power kit is equipped with high-performance coils in the important places and contains high-quality capacitors in essential places (e.g. in front of the midrange speakers: film capacitors.

Technical data:

  • Impedance: 4 Ohm
  • Sound pressure level (2.83V/1m): 88 dB
  • Dimensions (HxWxD): 1500 x 280 x 410 mm
  • Frequency range (-8dB): 30 - 38000 Hz
  • Crossover frequency(s): 210, 1900 Hz
  • Principle: closed box

Highlights

  • Audaphon AC Aluminium Ribbon Tweeter APR 1.0
  • 2x WF152CU14, Wavecor woofer, 8 Ohm, paper, BD, phase plug
  • 4x Wavecor SW223BD02, 4 Ohm, subwoofer with cast basket
  • 3x insulation fleece MT Bondum 800 (30 x 50 x 2 cm)
  • 4x insulation material Sonofil 100 x 35 cm for 20 liters
  • Pole terminals PK28 I Ni, one pair, nickel-plated, red+black
  • 5m speaker cable 2x1.5 mm2 black/red
  • Pan screws 3.5x17 black, Torx, 8 pieces
  • 4x pan screws 4x20 black, Torx, 8 pieces
  • Construction plan for the kit the crossover components (right), to be assembled on a wooden board.
  • Jantzen Cross Cap MKP Capacitor 82 μF / 400V
  • Jantzen Cross Cap MKP Capacitor 150 μF / 400V
  • Audaphon MKP CAP Superior 0.33 μF / 400 Vdc
  • Audaphon MKP CAP Superior 2.2 μF / 400 Vdc
  • Audaphon MKP CAP Superior 3.9 μF / 400 Vdc
  • Audaphon MKP CAP Superior 8.2 μF / 400 Vdc
  • Audaphon MKT Capacitor 4.7 μF / 160 Vdc
  • Audaphon MKT Capacitor 33 μF / 160 Vdc
  • Mundorf Air Coil L140, 0.82 mH/0.26 Ohm
  • 0.7 mm Air Coil, 0.68 mH/0.70 Ohm
  • 0.7 mm air coil, 0.068 mH
  • Mundorf H-core coil H71, 3.3 mH/0.47 0hm
  • Mundorf H-core coil H71, 4.7 mH/0.46 0hm
  • Mundorf BT180 transformer coil 4.7mH
  • 2x metal oxide resistor MOX10 4.7 Ohm (yellow-violet-gold)
  • Metal oxide resistor MOX10 6.8 Ohm (blue-gray-gold)
  • 2x ceramic resistor 10 Ohm/20 Watt

Audaphon Sculptor
2 Items

You might also like

CVS10C - OFC speaker cable 2x1.0mm² - white sheath CVS10C - OFC speaker cable 2x1.0mm² - white sheath 2
SHIPMENT IN 5/7 WORKING DAYS
Speakers Cables for Home HIFI

SPEAKERS CABLE CVS25C - OFC 2x2.5mm² - white sheath

XPL
CVS25C
rating 0 review
€2.59
SPEAKERS CABLE CVS25C - OFC  2x2.5mm² - white sheath Bipolar OFC copper cable for 2x2.5mm² speakers composed of 7 braids with 32 wires each of 0.12mm. External dimensions: 3.8x7.6mm. Available in 50m and 100m air-wound rolls. Excellent quality .. Price per linear meter. Technical features Cable type Double wire speaker Cross section Cable 25 mm Cable...
Dayton Audio BR-1 2-Way Bookshelf Monitor Speaker Dayton Audio BR-1 2-Way Bookshelf Monitor Speaker 2
  • On sale!
  • -10%
SHIPMENT IN 7-10 WORKING DAYS
DIY speaker kit

Dayton Audio BR-1 2-Way Bookshelf Monitor Speaker

Dayton Audio
BR-1
rating 0 review
€386.10 €429.00
Dayton Audio BR-1 2-Way Bookshelf Monitor Speaker Kits, Pair highlights Inexpensive, easy-to-build 2-way system for the novice speaker builder Includes everything you need to build a pair Perfect introduction to the theory, construction and soldering of loudspeakers The fully finished case allows this kit to be completed in a few hours

16 other products in the same category:

Scan Speak Gatria floorstanding loudspeakers Kit with high-end crossover
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Scan Speak Gatria floorstanding loudspeakers Kit with high-end crossover

Scan Speak
Scan Speak Gatria
rating 0 review
€1,101.00
Scan Speak Gatria floorstanding loudspeakers Kit with high-end crossover Kit with high-end crossover without housing price per speaker The high-end kit is equipped with baked enamel coils in the important places to reduce the microphonic effect (the current through the coil generates a magnetic field, which in turn sets the winding in motion. 
Celestion HiFi-PA 2x8/2 floorstanding speakers Kit with high-end crossover
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Celestion HiFi-PA 2x8/2 floorstanding speakers Kit with high-end crossover

Celestion
Celestion HiFi-PA 2x8/2
rating 0 review
€512.00
Celestion HiFi-PA 2x8/2 floorstanding speakers Kit with high-end crossover Kit with high-end crossover without housing, price per speaker The high-end kit is equipped with baked varnish coils in the important places to reduce the microphonic effect (the current through the coil generates a magnetic field, which in turn sets the winding in motion.
Visaton Aluminata 130/4 KE floorstanding loudspeaker from Hobby Hifi 3/2016
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Visaton Aluminata 130/4 KE floorstanding loudspeaker from Hobby Hifi 3/2016

Visaton
Aluminata 130/4 KE
rating 0 review
€1,297.00
Visaton Aluminata 130/4 KE floorstanding loudspeaker from Hobby Hifi 3/2016 Kit without housing price per speaker Aluminata 130/4KE is a 2 1/2-way floor-standing loudspeaker with four mid-woofers arranged in a row. Two of these are used as mid-woofers; the other two complement the first two in the lower frequency range. The upper two mid-woofers have the...
Audaphon Audimax -TL 18.2 RB floorstanding loudspeaker Kit with high-end crossover
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Audaphon Audimax -TL 18.2 RB floorstanding loudspeaker Kit with high-end crossover

Audaphon
Audaphon Audimax -TL 18.2 RB
rating 0 review
€1,429.00
Audaphon Audimax -TL 18.2 RB floorstanding loudspeaker Kit with high-end crossover with high-end crossover without housing, price per speaker The high-end kit is equipped with Heptalitze coils in the important places. The capacitors for the Audaphon APR 1.0 - where quality is particularly important - are high-quality Mundorf MCAP Supreme Evo oil capacitors.
Audaphon Big Block 3.0 floorstanding speakers from Hobby Hifi 5/2020
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Audaphon Big Block 3.0 floorstanding speakers from Hobby Hifi 5/2020

Audaphon
Audaphon Big Block 3.0
rating 0 review
€1,751.00
Audaphon Big Block 3.0 floorstanding speakers from Hobby Hifi 5/2020 Kit without housing, price per speaker Big Block 3.0 is a three-way floor-standing loudspeaker with a very smooth frequency response and exemplary decay behavior. Big Block 3.0 is a high-quality loudspeaker with chassis from Audaphon and Wavecor, in which passive membranes are used for...
Scan Speak BeTi 4x4 floorstanding loudspeakers Kit with high-end crossover
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Scan Speak BeTi 4x4 floorstanding loudspeakers Kit with high-end crossover

Scan Speak
Scan Speak BeTi 4x4 0
rating 0 review
€1,698.00
Scan Speak BeTi 4x4 floorstanding loudspeakers Kit with high-end crossover Kit with high-end crossover without housing price per speaker The high-end kit is equipped with baked varnish coils in the important places to reduce the microphonic effect (the current through the coil generates a magnetic field, which in turn sets the winding in motion. 
Celestion Celeste Satellit Floorstanding speakers in Hobby Hifi 6/2013
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Celestion Celeste Satellit Floorstanding speakers in Hobby Hifi 6/2013

Celestion
Celestion Celeste Satellit
rating 0 review
€471.00
Celestion Celeste Satellit Floorstanding speakers in Hobby Hifi 6/2013 Kit without housing, price per speaker Celeste (Italian for heavenly) was derived from the name of the chassis manufacturer "Celestion". The kit developed by Bernd Timmermanns contains a Celestion bass driver, which performed excellently in the chassis test. A Celestion CDX1-1430...
Scan Speak CT 304 floorstanding loudspeaker Kit with high-end crossover
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Scan Speak CT 304 floorstanding loudspeaker Kit with high-end crossover

Scan Speak
Scan Speak CT 304
rating 0 review
€260.00
Scan Speak CT 304 floorstanding loudspeaker Kit with high-end crossover Kit with high-end crossover without housing price per speaker The high-end kit is equipped with baked enamel coils in the important places to reduce the microphonic effect (the current through the coil generates a magnetic field, which in turn sets the winding in motion. 
Celestion Celeste Satellit Floorstanding speakers Kit with high-end crossover from Hobby HiFi
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Celestion Celeste Satellit Floorstanding speakers Kit with high-end crossover from...

Celestion
Celestion Celeste Satellit
rating 0 review
€514.00
Celestion Celeste Satellit Floorstanding speakers Kit with high-end crossover from Hobby HiFi Kit with high-end crossover without housing, price per speaker In the high-end version proposed by Hobby Hifi, coils with baked enamel wire are used instead of coils made of conventional, enamel-insulated wire. MKP capacitors with a 630V limit voltage are used as...
Tang Band Dschinn Mini-TL 2.5 floorstanding loudspeaker Kit with high-end crossover
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Tang Band Dschinn Mini-TL 2.5 floorstanding loudspeaker Kit with high-end crossover

Scan Speak
Dschinn Mini-TL 2.5
rating 0 review
€302.00
Tang Band Dschinn Mini-TL 2.5 floorstanding loudspeaker Kit with high-end crossover Kit with high-end crossover without housing price per speaker The high-end kit is equipped with baked varnish coils in the important places to reduce the microphonic effect (the current through the coil generates a magnetic field, which in turn sets the winding in motion....
Product added to wishlist
Product added to compare.