Tang Band Dschinn Mini-TL MTM floorstanding loudspeaker from Hobby Hifi 6/2020
Tang Band Dschinn Mini-TL MTM floorstanding loudspeaker from Hobby Hifi 6/2020

Tang Band Dschinn Mini-TL MTM floorstanding loudspeaker from Hobby Hifi 6/2020

Tang Band Dschinn Mini-TL MTM floorstanding loudspeaker from Hobby Hifi 6/2020

Kit without housing price per speaker

Dschinn Mini-TL MTM is a two-way floor-standing loudspeaker. Dschinn Mini-TL exists as a two-way loudspeaker with a bass-tweeter-bass arrangement or as a two-and-a-half-way arrangement with a tweeter, midrange loudspeaker and bass loudspeaker.

SHIPMENT IN 7-10 WORKING DAYS
€206.00
Tax included
rating No review at the moment

Estimated Shipping Costs
Shipping Costs
€46.80
Shipping Time
.
Want to check another country or courier?

You might also like

 

Tang Band Dschinn Mini-TL MTM floorstanding loudspeaker from Hobby Hifi 6/2020

Kit without housing price per speaker

Dschinn Mini-TL MTM is a two-way floor-standing loudspeaker. Dschinn Mini-TL exists as a two-way loudspeaker with a bass-tweeter-bass arrangement or as a two-and-a-half-way arrangement with a tweeter, midrange loudspeaker and bass loudspeaker. Dschinn Mini-TL MTM is a transmission line loudspeaker with chassis from Omnes Audio and Tang Band. The loudspeaker contains the following chassis: - an air motion transformer (ribbon tweeter) Omnes Audio AMT50 - two woofers Tang Band W4-655 The loudspeaker was developed by Bernd Timmermanns. The crossover consists of: - a 2nd order high pass (12 dB / octave) for the tweeter. - a 2nd order low pass (12 dB / octave) for the midrange woofer. The frequency response of the loudspeaker is balanced. The decay spectrum is almost error-free. The non-linear distortions at medium volumes (90 dB, 1m) are below 0.4% above 300 Hz.

.

Technical data:

  • Impedance: 4 Ohm
  • Sound pressure level (2.83V/1m): 89 dB
  • Dimensions (HxWxD): 800 x 160 x 272 mm
  • Frequency range (-8dB): 48 - 28000 Hz
  • Crossover frequency(s): 4000 Hz
  • Principle: Transmission line box
.

Highlights

  • Omnes Audio AMT 50
  • 2x Tang Band W4-655 C, unshielded
  • Insulation fleece MT Bondum 800 (30 x 50 x 2 cm)
  • 0.5x PE foam sealing strip, 5x2 mm, roll 7.5 m
  • 0.5x insulation material Sonofil 100 x 35 cm for 20 liters
  • Pole terminals PK31, one pair, gold-plated, red+black
  • 3m speaker cable 2x1.5 mm2, transparent
  • 1.5x Pan screws 4x20 black, Torx, 8 pieces
  • Construction plan for the kit the crossover components (right), to be assembled on a wooden board.
  • Audaphon MKP CAP Superior 5.6 μF; / 400 Vdc
  • Audaphon MKP CAP Superior 10 μF; / 400 Vdc
  • Mundorf baked varnish air coil BL71, 0.18 mH/0.34 Ohm
  • Mundorf baked varnish air coil BL100, 0.82 mH/0.45 Ohm
  • Metal oxide resistor MOX10 2.2 Ohm (red-red-gold)
Dschinn Mini-TL MTM
2 Items

You might also like

CVS10C - OFC speaker cable 2x1.0mm² - white sheath CVS10C - OFC speaker cable 2x1.0mm² - white sheath 2
SHIPMENT IN 5/7 WORKING DAYS
Speakers Cables for Home HIFI

SPEAKERS CABLE CVS25C - OFC 2x2.5mm² - white sheath

XPL
CVS25C
rating 0 review
€2.59
SPEAKERS CABLE CVS25C - OFC  2x2.5mm² - white sheath Bipolar OFC copper cable for 2x2.5mm² speakers composed of 7 braids with 32 wires each of 0.12mm. External dimensions: 3.8x7.6mm. Available in 50m and 100m air-wound rolls. Excellent quality .. Price per linear meter. Technical features Cable type Double wire speaker Cross section Cable 25 mm Cable...
Dayton Audio BR-1 2-Way Bookshelf Monitor Speaker Dayton Audio BR-1 2-Way Bookshelf Monitor Speaker 2
  • On sale!
  • -10%
SHIPMENT IN 7-10 WORKING DAYS
DIY speaker kit

Dayton Audio BR-1 2-Way Bookshelf Monitor Speaker

Dayton Audio
BR-1
rating 0 review
€386.10 €429.00
Dayton Audio BR-1 2-Way Bookshelf Monitor Speaker Kits, Pair highlights Inexpensive, easy-to-build 2-way system for the novice speaker builder Includes everything you need to build a pair Perfect introduction to the theory, construction and soldering of loudspeakers The fully finished case allows this kit to be completed in a few hours

16 other products in the same category:

Scan Speak Illuminata 18 R3004-662000 floorstanding loudspeaker Kit with high-end crossover
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Scan Speak Illuminata 18 R3004-662000 floorstanding loudspeaker Kit with high-end...

Scan Speak
Illuminata 18 R3004-662000
rating 0 review
€1,257.00
Scan Speak Illuminata 18 R3004-662000 floorstanding loudspeaker Kit with high-end crossover Kit with high-end crossover without housing price per speaker The high-end kit contains three Mundorf EVO silver-gold oil capacitors in series with the tweeter. Most of the coils are designed as baked varnish air coils. 
Scan Speak Gatria floorstanding loudspeakers from K+T magazine 4/2019
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Scan Speak Gatria floorstanding loudspeakers from K+T magazine 4/2019

Scan Speak
Scan Speak Gatria
rating 0 review
€927.00
Scan Speak Gatria floorstanding loudspeakers from K+T magazine 4/2019 Kit without housing  price per speaker Gatria is a two-way floorstanding loudspeaker. Gatria is a bass reflex loudspeaker with chassis from Scan Speak and Wavecor. The loudspeaker contains the following loudspeaker chassis: - a Scan-Speak R2904-700005 tweeter - two Wavecor WF182CU13...
Audaphon Audimax Reference Standard floorstanding loudspeakers from Hobby Hifi 1/2021
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Audaphon Audimax Reference Standard floorstanding loudspeakers from Hobby Hifi 1/2021

Audaphon
Audaphon Audimax Reference
rating 0 review
€2,827.00
Audaphon Audimax Reference Standard floorstanding loudspeakers from Hobby Hifi 1/2021 Kit without housing, price per speaker Audimax Reference Standard is a three-way floorstanding loudspeaker. Audimax Reference Standard is a bass reflex loudspeaker with chassis from Audaphon, Hobby HiFi (Made by SEAS) and Visaton.
Visaton Audimax -TL 28.3 floorstanding loudspeaker from Hobby Hifi 5/2018
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Visaton Audimax -TL 28.3 floorstanding loudspeaker from Hobby Hifi 5/2018

Visaton
Audimax -TL 28.3
rating 0 review
€1,612.00
Visaton Audimax -TL 28.3 floorstanding loudspeaker from Hobby Hifi 5/2018 Kit without housing price per box Audimax-TL 28.3 is a three-way floor-standing loudspeaker. Audimax-TL 28.3 is a transmission line loudspeaker with chassis from SB Acoustics, SEAS and Visaton. Our kit contains the following loudspeakers: - a tweeter SB Acoustics TW29BN - a midrange...
Monacor HiFi-PA 2x8/2 floorstanding speakers from Hobby Hifi 3/2019
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Monacor HiFi-PA 2x8/2 floorstanding speakers from Hobby Hifi 3/2019

MONACOR
Monacor HiFi-PA 2x8/2
rating 0 review
€449.00
Monacor HiFi-PA 2x8/2 floorstanding speakers from Hobby Hifi 3/2019 Kit without housing price per speaker HiFi-PA 2x8/2 is a two-way floor-standing loudspeaker. HiFi-PA 2x8/2 is a bass reflex loudspeaker with chassis from Celestion and Monacor. The loudspeaker contains the following loudspeaker chassis: - a Monacor MRH-180 tweeter with Celestion CDX1-1747...
Celestion Cinecor L Floorstanding speakers Kit with high-end crossover
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Celestion Cinecor L Floorstanding speakers Kit with high-end crossover

Celestion
Celestion Cinecor L
rating 0 review
€917.00
Celestion Cinecor L Floorstanding speakers Kit with high-end crossover Kit with high-end crossover without housing, price per speaker The high-end kit is equipped with baked varnish coils in the important places to reduce the microphonic effect (the current through the coil generates a magnetic field, which in turn sets the winding in motion
ScanBySide 2
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Scan Speak ScanBySide 2 floorstanding speakers from Hobby Hifi 4/2020

Scan Speak
ScanBySide 2
rating 0 review
€783.00
Scan Speak ScanBySide 2 floorstanding speakers from Hobby Hifi 4/2020 Kit without housing price per speaker ScanBySide 2 is a three-way floor-standing loudspeaker with a flat frequency response from under 30 to over 40,000 Hz, low distortion and an excellent decay spectrum. ScanBySide 2 is a closed loudspeaker with chassis from SB Acoustics and Scan...
Visaton Aluminata 130/4 KE floorstanding loudspeaker Kit with high-end crossover
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Visaton Aluminata 130/4 KE floorstanding loudspeaker Kit with high-end crossover

Visaton
Aluminata 130/4 KE
rating 0 review
€1,627.00
Visaton Aluminata 130/4 KE floorstanding loudspeaker Kit with high-end crossover Kit with high-end crossover without housing price per speaker The high-end kit contains an MKP capacitor instead of a smooth electrolytic capacitor. High-quality silver-gold-oil capacitors are used in series with the tweeter. 
Audaphon ViDipol DSP floorstanding loudspeaker from Hobby Hifi 2/2020
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Audaphon ViDipol DSP floorstanding loudspeaker from Hobby Hifi 2/2020

Audaphon
Audaphon ViDipol DSP
rating 0 review
€1,132.00
Audaphon ViDipol DSP floorstanding loudspeaker from Hobby Hifi 2/2020 Kit without housing, price per pair ViDipol DSP is a two-way floorstanding loudspeaker. ViDipol DSP is a bass reflex loudspeaker with a chassis from Visaton. The Visaton B100 broadband loudspeaker is operated as a dipole. The Audaphon AMP-2200 used in Hobby HiFi is only used to amplify...
Visaton Aluminata 130/4 KE floorstanding loudspeaker from Hobby Hifi 3/2016
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Visaton Aluminata 130/4 KE floorstanding loudspeaker from Hobby Hifi 3/2016

Visaton
Aluminata 130/4 KE
rating 0 review
€1,297.00
Visaton Aluminata 130/4 KE floorstanding loudspeaker from Hobby Hifi 3/2016 Kit without housing price per speaker Aluminata 130/4KE is a 2 1/2-way floor-standing loudspeaker with four mid-woofers arranged in a row. Two of these are used as mid-woofers; the other two complement the first two in the lower frequency range. The upper two mid-woofers have the...
Audaphon Sculptor fFloorstanding loudspeaker for high volume (with high-power crossover)
SHIPMENT IN 7-10 WORKING DAYS
DIY component packs

Audaphon Sculptor fFloorstanding loudspeaker for high volume (with high-power crossover)

Audaphon
Audaphon Sculptor
rating 0 review
€2,742.00
Audaphon Sculptor fFloorstanding loudspeaker for high volume (with high-power crossover) Kit with high-power crossover without housing, price per speaker The high-power kit is equipped with high-performance coils in the important places and contains high-quality capacitors in essential places (e.g. in front of the midrange speakers: film capacitors.
Product added to wishlist
Product added to compare.