miniDSP PWR-ICE125 ICEpower Plate Amplifier
2x125W @ 4Ω or 1 x 450W @ 4Ω DSP plate amplifier, Powered by ICEpower® 125ASX2 module, Ethernet control, FIR + IIR filters
.
Product Highlights
- DSP Powered plate amplifier
- FIR + IIR filter options (please consult manual for details)
- Powered by ICEpower® technology for 2x125W @ 4Ω or 1 x 450W @ 4Ω
- Windows & Mac IP control
- Analog & Digital input
- Multi-unit control via Ethernet
.
Product details
PWR-ICE125 2 x 125 Watt DSP ICEpower Plate Amplifier
Introducing the PWR-ICE125, a DSP powered plate amplifier module for active 2 way loudspeakers or mono subwoofers. Result of the collaborative effort of two innovative technology companies, the PWR-ICEs series key features are:
On the processing side is miniDSP's innovative software & firmware allowing a Plug & Play real time control of the onboard DSP over Ethernet/Wifi networks. Using our Zero Conf technology, multiple modules are automatically discovered and controlled from a single User interface in real time. The onboard Digital Signal Processors (DSP) provide real time all the processing a speaker designers will expect to excel at his crossover design task. These include FIR and IIR filters (biquad input), Parametric Equalizers (PEQ), level, crossovers, comp/limiter, delay and more. The Graphical User Interface (GUI) platform is supported on both Mac and Windows environment.
On the power amplifier side, the ICEpower® modules are complete AC plug-to-speaker amplification audio solutions offering flexible two-channel or bridgeable speaker drive. Their compact size, audiophile audio quality and high power output make them perfect for high-performing audio products. The amplifier is rated for up to 2x125W @ 4Ω or 1 x 450W @ 4Ω.
As for audio connectivity, the PWR-ICE125 is fitted with both analog balanced (XLR) & unbalanced inputs (RCA) to provide maximum compatibility. A digital input (AES-EBU) saves on the A-D conversion for maximum performance while a Digital output (AES-EBU) allows multiple plate amplifiers to be linked to each other.
.
-
Specifications:
- Article number PWR-ICE125
- Rated power output 2 x 120 watts at 4 ohms
- Rated power output bridged 1 x 450 watts at 4 ohms
- Minimum load 3 ohms
- Signal-to-noise ratio (SNR) -
- Distortion 0.003 % THD+N (100 Hz at 1 watt)
- Distortion bridged 0.003 % THD+N (100 Hz at 1 watt)
- Amplifier classification Class D
- Circuit topology ICEpower
- Efficiency 75 % at 100 watts
- Frequency response 20 - 20,000 Hz
- Input impedance 10k ohms (unbalanced) 47k ohms (balanced)
- Input sensitivity 1/2 Vrms (unbalanced) 2/8 Vrms (unbalanced)
- Auto turn-on sensitivity -
- DSP
- DAC
- Maximum sampling rate 96 kHz
- Speaker output channels 2
- Analog in/out 1/-
- S/PDIF in/out -/-
- AES/EBU in/out 1/1
- Coaxial in/out -/-
- RCA in/out 1/-
- XLR in/out 2/1
- Jack in/out -/- U
- SB connection -
- Network connection
- Bluetooth -
- Subwoofer pre-out -
- Auto on/off -
- Remote control -
- App control
- Equalizer (EQ) adjustment
- Equalizer (EQ) profiles -
- Phase contro
- l Crossover frequency adjustment
- Presets
- Control software miniDSP plugin
- Windows/Mac compatible /
- Power requirements 110 / 240 VAC
- Power inlet connector IEC C14
- Standby power consumption -
- Current limit 20 A
- Under/over voltage protection -
- Dimensions (H x W x D) 216 x 153 x 75 mm
- Cutout dimensions 202 x 139 mm
What's included in the Box?
- 1 x PWR-ICE125 amplifier module
- 1 x CAT5 patch cable
- 1 x IEC power cord
- 4 x black wood screws for mounting
- 1 x Speaker wire harness to connect amplifier to speaker (60cm long)
- 1 x Coupon code for miniDSP plugin download