Beyma CD-2514FE/PT - Compression Driver 1.4" 8ohm 108.5dB 100W Ferrite

The CD2514 is designed for high-quality audio system applications where truly high SPL and minimal distortion are fundamental. The controllers feature a 1.4-pull weight and a 2.5-pull coil diameter. They are available with two premium materials and three different cups made of titanium, advanced polyester and high-temperature polymer. Each of these three materials poses unique physical properties that allow system designers to choose between three different characteristics within a similar range of power and sensitivity. Both the Neodymium and Ferrite versions belong to Beyma's new DEPLOCEX technology, which makes them more efficient and immune to the phenomenon of energy understanding. The three have high efficiency and excellent transient response. While the titanium is very linear with a light decay for high frequencies, the high temperature polymer has a higher sensitivity at 5 KHz and higher, which provides that additional presence that on occasion is required for larger or larger scale systems. reverberant surroundings. On the other hand, the polyester with less elasticity modulus holds a softer response with a range starting from 15KHz which will bring a pleasant sensation of air in the sound of the enclosures. The version with a neodymium core allows you to improve performance and reduce the weight and size of the assembly. For applications where the weight is not so important, the version of the wound case can be equal to that of its neodymium iron in performance, but at a lower price. Garganta diameter 1.4" (36 mm) Spool diameter 2.5" (63.5 mm) Power (AES) 100 W (>1.2 kHz) Sensitivity 108.5 dB Advanced polyester diaphragm material Material of the magnetic circuit Ferrite Patentes DEPLOCEX Technology

.

Key Features:

• Next generation high performance 1.4” (36 mm) exit compression driver
• Deplocex® Patent Pending Technology for improved thermal disipation, low power compression losses and high power handling 
• 2.5” (63.5 mm) Copper Clad Aluminum voice coil with Nomex former
• 200W program power above 1.2kHz
• Sensitivity: 108.5 dB (1W / 1m) Exclusive Advanced Polyester dome and surround design optimized with F.E.M for linear and extended response with minimized resonances
• Copper shorting cap for reduced distortion, linear inductance and increased output 
• Propietary design of metal alloy phase plug with F.E.M optimized geometry and improved assembly design
• F.E.M. optimized ceramic magnetic circuit 
• Aluminum cover

.

Technical Specifcations:

• Throat diameter 36 mm 1.4 in
• Rated impedance 8 Ω
• Minimum impedance 6.3 Ω
• A.D. resistance 4.4 Ω
• Power capacity 80 WAES above 0.8 kHz
• Program power 100 WAES above 1.2 kHz
• Sensitivity 108.5 dB 1W / 1m @ ZN coupled to TD-385
• Frequency range 0.6 - 20 kHz
• Recommended crossover 0.8 kHz or higher (12 dB/oct min.)
• Voice coil diameter 63.5 mm 2.5 in
• Flux density 1.6 T
• Bl factor 6.3 N/A

.

Mounting Informations:

• Overall diameter 145 mm 5.71 in
• Depth 62.7 mm 2.47 in
• Mounting Four M6 threaded holes, 90º apart on 101.6 mm (4 in) diameter circle
• Net weight 3.5 kg
• Shipping weight 3.7 kg