Match UP 1FX AMPLIFIER 1x350W Upgrade-amplifier
.
Technical data
Power RMS
- @ 4 Ohm: 1x 350 W
- @ 2 Ohm: 1x 600 W
- @ 1 Ohm: 1x 900 W (Permanent 1 Ohm power only achieved with music signal)
Max. power: up to 1000 watts RMS @ 1 Ohm
Amplifier technology: Class D
Inputs:
- 1 x Cinch
- 2 x high-level speaker input
- 1 x Remote In
- 1 x remote control input
Input sensitivity:
- Cinch 0.5 - 3 volts or 1 - 6 volts
- High level 2.5 - 16 volts or 5 - 32 volts
Input impedance
- Cinch: 8.6 kOhm
- High level: 2.5 - 16 V or 5 - 32 V
Outputs: 1 x speaker output
Output voltage Cinch: 3 volts
Frequency range: 10 Hz - 25,000 Hz
Low pass: 50 Hz - 250 Hz adjustable (can be switched off)
Subsonic: 15 Hz (can be switched off)
High/low pass slope: 12 dB
Subsonic/low pass slope: 12 dB
Signal/noise ratio analog input: 108 dB (A-weighted)
Total harmonic distortion (THD): < 0.002%
Attenuation factor: > 160
Operating voltage: 10.5 - 18 volts (max. 5 seconds down to 6 volts)
Idle current consumption: 1050 mA
Fuse: 2 x 30 A LP mini plug-in fuse
Power consumption: DC 12 V, 80 A max.
Additional features: Active, adjustable crossover, start-stop capability, High-level input with automatic switching on, ADEP.3, DirectDSP function
Dimensions (H x W x D): 46 x 130 x 153 mm
.
Scope of delivery
1 x amplifier MATCH UP 1FX
1 x mounting plates & material
1 x operating instructions