Hypex FA251 1 x 250 Watt FusionAmp
Hypex FA251 1 x 250 Watt FusionAmp
The FA251 250 Watt FusionAmp is a DSP controlled two channel plate amplifier. It can be the basis of a powerful active subwoofer or an active one-way monitor
Hypex FA251 1 x 250 Watt FusionAmp
The FA251 250 Watt FusionAmp is a DSP controlled two channel plate amplifier. It can be the basis of a powerful active subwoofer or an active one-way monitor
Highlights
- Ncore based amplifier technology
- DSP controlled
- All-in-one Hypex Solution
- Neutral and transparent reproduction
- Wide range of analog and digital inputs
Product Details
Hypex FA251 250 Watt FusionAmp
Due to the combination of SMPS, DSP and a Ncore based amplifier packed in this plate amplifier, FusionAmp is one of the best amplification solutions available for active speaker designs. The integrated DSP provides great audio processing functionality. Thanks to the Ncore technology distortion (THD and IMD) over the full audio and power range is negligible. Distortion at listening levels (1W) is unmeasurable.
The FA251 has one powerful 250 watt Ncore amplifier. A variety of input options ensure compatibility with most source equipment. Hypex provides their HFD (Hypex Filter Design) software to design and configure filters for the FusionAmp. You can easily add functionality to the FusionAmp with the Fusion Remote Kit for remote controllability. Due to thermal regulation these FusionAmp's are not airtight.
To protect your valuable drivers, the DSP does not contain a filter out of the box. A filter needs to be configured and uploaded using Hypex Filter design (HFD) software before the FusionAmp will produce an output signal. You can download the HFD software here.
Features
- 15 biquads per amplifier
- Three selectable presets for filters
- Source selection
- Signal detect
- Auto shutdown
- BTL capable
- Clip protect
- Thermal protect
- Filter protection
What’s in the box?
- FA251 FusioAmp
- A printed copy of the user guide
Spezifikationen für: FA251 1 x 250 Watt FusionAmp
- Rated power output (RMS)1 x 250 watts at 4 ohms
1 x 130 watts at 8 ohms
1 x 180 watts at 2 ohms - Bridged rated power output (RMS)Minimum load
- 2 ohms
- Signal-to-noise ratio (SNR)121 dB
- Distortion.0015 % THD+N (10-20,000 Hz at 0.5 x rated power output)
- Distortion bridged -
- Amplifier classification Class D
- Circuit topology Ncore®
- Efficiency 92 % at full power
- Frequency response 10 - 50,000 Hz
- Input impedance
54k ohms (unbalanced RCA)
44k ohms (balanced XLR DM)
2.2m ohms (balanced XLR CM) - Input sensitivity 1.66 Vrms for rated power output
- Auto turn-on sensitivity -
- Maximum sampling rate
192 kHz
96 kHz (optical) - Speaker output channels 1
- Analog in/out 1/1
- S/PDIF in/out - / -
- AES/EBU in/out - / -
- Coaxial in/out - / -
- RCA in/out 1/ -
- XLR in/out 1/1
- Jack in/out - / -
- Network connection -
- Bluetooth -
- Subwoofer pre-out -
- App control -
- Control software Hypex Filter Design
- Power requirements 200-240 VAC ±10%
- Power inlet connector IEC C14
- Standby power consumption -
- Current limit 17.5 A
- Dimensions (H x W x D) 280 x 120 x 55 mm
- Cutout dimensions 256 x 96 mm
Products from the same category
Products from the same brand