- -5%
Hypex FA122 2 x 125 Watt FusionAmp
Hypex FA122 2 x 125 Watt FusionAmp
The FA122 2x125 Watt FusionAmp is a DSP controlled two channel plate amplifier. It can be the basis of a two-way active speaker or an active subwoofer.
Hypex FA122 2 x 125 Watt FusionAmp
The FA122 2x125 Watt FusionAmp is a DSP controlled two channel plate amplifier. It can be the basis of a two-way active speaker or an active subwoofer.
Highlights
- Ncore based amplifier technology
- DSP controlled
- All-in-one Hypex Solution
- Neutral and transparent reproduction
- Wide range of analog and digital inputs
Product details
Hypex FA122 2x125 Watt FusionAmp
Due to the combination of SMPS, DSP and Ncore based amplifiers packed in this plate amplifier, Fusion Amp is one of the best amplification solutions available for active speaker designs. The integrated DSP provides great audio processing functionality. Thanks to the Ncore technology distortion (THD and IMD) over the full audio and power range is negligible. Distortion at listening levels (1W) is unmeasurable.
The FA122 has two 125 watt Ncore amplifiers which can also be bridged to form one powerful 250 watt amplifier. A variety of input options ensure compatibility with most source equipment. Hypex provides their HFD (Hypex Filter Design) software to design and configure filters for the FusionAmp. You can easily add functionality to the FusionAmp with the Fusion Remote Kit for remote controllability. Due to thermal regulation these FusionAmp's are not airtight.
To protect your valuable drivers, the DSP does not contain a filter out of the box. A filter needs to be configured and uploaded using Hypex Filter design (HFD) software before the FusionAmp will produce an output signal. You can download the HFD software here .
features
- 15 biquads per amplifier
- Three selectable presets for filters
- Source selection
- Signal detect
- Auto shutdown
- BTL capable
- Clip protect
- Thermal protect
- Filter protection
What's in the box?
- FA122 FusioAmp
- A printed copy of the user guide
Specifications for: FA122 2 x 125 Watt FusionAmp
- Rated power output (RMS)2 x 125 watts at 4 ohms
2 x 75 watts at 8 ohms
2 x 115 watts at 2 ohms - Bridged rated power output (RMS)1 x 200 watts at 4 ohms
1 x 250 watts at 8 ohms
- Minimum loa2 ohms
- Signal-to-noise ratio (SNR118 dB
- Distortio0.0015% THD + N (10-20,000 Hz at 0.5 x rated power output)
- Distortion bridged-
- Amplifier classificationClass D
- Circuit topologyNcore®
- Efficiency92% at full power
- Frequency response10 - 50,000 Hz
- Input impedance
54k ohms (unbalanced RCA)
44k ohms (balanced XLR DM)
2.2m ohms (balanced XLR CM) - Input sensitivity1.17 Vrms for rated power output
- Auto turn-on sensitivity-
- Maximum sampling rate
192 kHz
96 kHz (optical) - Speaker output channels2
- Analog in / out1/1
- S / PDIF in / out2/1
- AES / EBU in / out1/1
- Coaxial in / out1/1
- RCA in / out1 / -
- XLR in / out2/2
- Jack in / out- / -
- Network connection-
- Bluetooth-
- Subwoofer pre-out-
- App control-
- Control softwareHypex Filter Design
- Power requirements200-240 VAC ± 10%
- Power inlet connectorIEC C14
- Standby power consumption-
- Current limit12.5 A
- Dimensions (H x W x D)315 x 120 x 55 mm
- Cutout dimensions291 x 96 mm
Customers who bought this product also bought:
Products from the same category
Products from the same brand