ClarityCap ESA Capacitors Polypropylen 630Vdc 3%

ClarityCap ESA Capacitors Polypropylen 630Vdc 3%

To select the version go to the drop-down below the price

The ESA series is the result of two years of research between ClarityCap and the University of Salford's Acoustics Research Centre.

The properties of the ESA series have been significantly improved by significantly reducing the resonance of the capacitor winding, even in the audible range.

This was achieved by selecting the highest quality polypropylene films and combining them with thick pure aluminum metallization. In addition, there is an intensive control of the manufacturing process.

The ESA series achieves exceptional results in audio applications with the 250V and 630V series. With less than 3% tolerance it is ensured that the components result in a balanced system.

The colors of the cover are selectable. Unless otherwise requested, the capacitors are supplied with a silver case and black resin.

Technical details

Tolerance +/-3%; lower values on request

Dissipation factor ≤ 0.001 @ 1 kHz, 20 °C

Rated voltage 250 Vdc or 630Vdc

Insulation resistance ≥ 10 000 MΩ x µF / C, C>330nF

≥ 30 000 MΩ , C<330nF @ nominal voltage, 20 °C

Dielectric losses ≤ 0.1% @ 20 °C

tested withstand voltage 1.5 x nominal voltage, 30 seconds, without repetition

Environment, test class 55/100/56 to EN 60068 - 1 (IEC 68 - 1) bump test EN 60068 - 2 - 29 (EIC 68 - 2 - 29) test Eb 400m/s2, 1000 bumps

Temperature range -40 to +70 °C

Vibration EN 60068 - 2 - 6 (EIC 68 - 2 - 6)

Test Fc 100 to 500 Hz 0.75mm or 100m/s2