ClarityCap PX Capacitor 250VDC Polypropylene

ClarityCap PX Capacitor 250VDC Polypropylene

To select the version go to the drop-down below the price

The ClarityCap PX is used worldwide wherever a cheap and at the same time high-quality capacitor is required. It is used by some of the most well-known brands in Europe, North America and Asia. Its almost unsurpassed price/performance ratio makes it an attractive component. It consists of a 250Vdc (6µm) foil, is wound. It receives a heat treatment before the insulated copper connections are hand-tinned to achieve the best possible connection. The low dissipation factor and the low dielectric damping of polypropylene combined with a high level of mechanical stability result in exceptional sound performance. The design results in low self-inductance and ESR (Equivalent Series Resistance); the components are very stable in terms of temperature and frequency. 

Technical details

Tolerance   +/-5%; lower values on request

Dissipation factor ≤ 0.001 @ 1 kHz, 20 °C

Rated voltage 160 Vdc, 250Vdc, 400Vdc, 630Vdc

Insulation resistance ≥ 10 000 MΩ x µF / C, C>330nF ≥ 30 000 MΩ , C<330nF @ nominal voltage, 20 °C

Dielectric losses ≤ 0.1% @ 20 °C

tested withstand voltage 1.5 x nominal voltage, 30 seconds, without repetition Environment

test class 55/100/56 to EN 60068 - 1 (IEC 68 - 1)

bump test EN 60068 - 2 - 29 (EIC 68 - 2 - 29) test Eb 400m/s2, 1000 bumps

Temperature range -55 to +100 °C

Vibration EN 60068 - 2 - 6 (EIC 68 - 2 - 6) Test Fc 10 to 500 Hz 0.75mm or 100m/s2