Arylic S50 Pro+ WiFi & aptX HD Preamplifier With Dac And Multiroom Support

Product description

The Arylic S50 pro+ is the replacement of the S50 pro and offers upgrades across the board. With expanded functionality and added features

.

Highlights

Bluetooth 5.0 and Wi-Fi streaming using the free app

12v Trigger output

RCA subwoofer output

ESS 9023 digital to analogue conversion

Cirrus logic analogue to digital conversion

Bluetooth 5.0 aptX HD low latency playback

High-Res Music Streaming for lossless playback

Supports multi-room and TWS use

OLED display

Optical in and out 

. 

Product details

Arylic S50 Pro+ WiFi & aptX HD Preamplifier With Dac And Multiroom Support

Features such as Wi-Fi and Bluetooth 5.0 connectivity, DLNA streaming, NAS (Network Attached Storage), online High-Res music streaming, aptX HD playback, and a free iOS and Android app are generally part of really expensive equipment. The Arylic S50 is jam-packed with all these features which is impressive, especially considering its price.

When you are near the S50 Pro you can easily control it with the included remote control and built in OLED Display, in any other situation you can open up the free app to control the volume of each Arylic device on your network, set up a multi-room network, create a True Wireless Stereo setup,  adjust equalizer settings, and select the desired source. The S50 Pro has a wide range of inputs, line-in, optical, wired or wireless network, Bluetooth connection, or USB input. Your amplifier or active speakers are simply hooked up using the RCA line-out thanks to the built-in ESS 9023 based DAC, the coaxial, or even the optical output. It also features a subwoofer output for an active subwoofer to create a 2.1 system. The intuitive inputs, outputs, remote control, and app make the S50 Pro extremely easy to hook up and set up for almost all of its users. The 12 volt trigger enables control over an external amplifier that supports trigger operation.

What also makes the S50 Pro such an outstanding preamplifier is that it supports High-Res Music streaming and aptX HD. This means no compression at all! 24bit/192kHz streaming brings you as close to the original recording as you can get. Closely following the High-Res Streaming, the addition of Bluetooth 5.0 aptX HD further improves Bluetooth audio processing, lowering latency and increasing the bit depth and bandwidth to a level that surpasses CD-quality.

.

Specifications

Article number S50 Pro

Rated power output (RMS) -

Bridged power output (RMS) -

Minimum load -

Signal-to-noise ratio (SNR) 110 dB

Distortion 0.03%

Distortion bridged -

Efficiency -

Frequency response 20 - 20.000 Hz

Input impedance -

Input sensitivity -

Auto turn-on sensitivity -

DSP in-app equalizer adjustment

DAC USB dac

Maximum sampling rate Up to 24bit/192kHz

Circuit Topology -

Amplifier classification -

Speaker output channels -

Subwoofer output channel RCA out

Analog in/out 1/1

Optical S/PDIF in/out 1/1

Coaxial in/out 0/1

RCA in/out 2/1

AUX in/out -/-

Bus in/out -/-

XLR in/out -/-

USB USB DAC

Memory card slot -

Network connection Single 10/100M RJ45

Headphone jack -

Subwoofer pre-out yes

Bluetooth Bluetooth 5.0 aptX-HD

NFC -

Wi-Fi IEEE802.11 b/g/n 2.4G

Banana plug compatible -

Remote control IR remote included

App control Free Android and iOS app

Auto turn-on -

Accepted file formats FLAC/MP3/AAC/AAC+/ALAC/APE/WAV

Equalizer (EQ) adjustment in-app equalizer adjustment

Equalizer (EQ) profiles -

Multi zone/room App supports Multi-Room playback

Crossover frequency adjustment -

Bridge mode -

Power requirements 5V, 1A DC

Power inlet connector

Micro USB

Power consumption -

Dimensions (D x W x H)

120 x 113 x 37 mm

Case material -