STETSOM DB500.1_4 Amplifier mono 4 ohm

Stetsom DB500.1 500 rms Digital Bass Module 1 channel 4 ohms Stetsom presented yet another novelty for the automotive sound market: the Stetsom DB 500 rms Digital Bass Amplifier Module 1 channel 4 ohms. Its main differential is that it brings all the advantages of a high-performance module to play the bass, but in a lower power version, being the only one on the market with less than 800w. Mounted on a compact housing with Vulcan line design, it has excellent heat dissipation capacity and also has an integrated ventilation system. It has gain control, LPF cut from 35hz to 250hz, Subsonic filter from 5 to 35hz, bass boost up to 18 decibels and accentuation frequency adjustment from 35 to 60hz.

Characteristics:

Number of Channels 1

RMS power: 500W

RMS Power into 4 Ohms: 12.6V 420W

RMS Power into 8 Ohms: 12.6V 240W

RMS Power into 4 Ohms: 13.8V 500W

RMS Power into 8 Ohms: 13.8V 290W

RMS Power into 4 Ohms: 14.4V 550W

RMS Power into 8 Ohms: 14.4V 320W

Supply Voltage: 9V to 15.5V DC

Frequency Response: 5Hz to 250Hz

Low Pass Crossover: 35Hz to 250Hz

High Pass Crossover: 5Hz to 35Hz (Subsonic)

Signal Noise Ratio: >90dB 

Input sensitivity: RCA: 200mV / HIGH INPUT: 1.5V

Input Impedance: RCA: 15K Ohms / HIGH INPUT: 1K Ohms

Minimum Output Impedance: 4 OHMS

Consumption with Musical Signal: 20A

Consumption with Bass Signal: 40A

Dimensions (H x W x L) mm: 55 x 162 x 125.5 mm

Weight Kg: 0.75 Kg