Mundorf BH100 1 to 15 mH 0,13 to 0,83 Ohm H Core Coil Varnished Ferrite
Mundorf BH100 1 to 15 mH 0,13 to 0,83 Ohm H Core Coil Varnished Ferrite
Mundorf BH100 1 to 15 mH 0,13 to 0,83 Ohm H Core Coil Varnished Ferrite
Mundorf BH100 1 to 15 mH 0,13 to 0,83 Ohm H Core Coil Varnished Ferrite

Mundorf BH100 1 to 15 mH 0,13 to 0,83 Ohm H Core Coil Varnished Ferrite

SHIPMENT IN 5-7 WORKING DAYS
€15.10
Tax included
rating No review at the moment

Mundorf BH100 1 to 15 mH 0,13 to 0,83 Ohm H Core Coil Varnished Ferrite

Available with different resistance values ​​(ohm).Values ​​from 0.13 to 0,83 ohms

To select the impedance go to the drop-down menu here below

Mundorf BH100

Estimated Shipping Costs
Shipping Costs
€10.80
Shipping Time
.
Want to check another country or courier?

You might also like

 

Mundorf BH100 1 to 15 mH 0,13 to 0,83 Ohm H Core Coil Varnished Ferrite

Available with different resistance values ​​(ohm).Values ​​from 0.13 to 0,83 ohms

To select the impedance go to the drop-down menu below the price

The coils offered here are made of enamelled copper wire with a purity (copper) of 99.99%. The coils have tinned wire ends and are labeled. The inductance is measured at 25 degrees Celsius; their tolerance is +/- 3%. L indicates the inductance, R the DC resistance, wire-D the wire diameter and DxH the diameter and height of the coil.
With the ferrite material HO 3616 Mundorf meets the wishes of many users for an inexpensive and at the same time heavy-duty ferrite material. The mechanical advantages of these relatively small coils are obvious. However, only a few materials meet the high demands in terms of resilience and distortion behavior. The material HP 3616 used by Mundorf and manufactured in Germany clearly distinguishes it from the widely used inexpensive Far East cores. The H series combines inexpensive electrical and mechanical data with relatively low costs.

Enameled wire spools of this type can be found below (their order number begins with "B".)

Note: The following performance data Pmax were determined in an ambient temperature of 20 degrees and 50 Hz with free air exchange (free convection). These are guidelines! Since we do not produce the coils, we can do it
 

bh100
10 Items

You might also like

Mundorf MSilence TWARON Angel Hair Wadding Mundorf MSilence TWARON Angel Hair Wadding 2
SHIPMENT IN 10 WORKING DAYS (ASK AVAIBILITY)
Foam material And insulation

Mundorf MSilence TWARON Angel Hair Wadding 200g

MUNDORF
M-angel-200g
rating 0 review
€79.00
Mundorf MSilence TWARON Angel Hair Wadding 200g M-angel-200g The extremely thin synthetic TWARON fibers are cut in 60mm pieces and carded to the elastic and easy to use wadding mass as it is supplied. Unlike glass- and other synthetic fibers, TWARON conducts heat (caused by vibrations) very well and so absorbs the acoustic movement energy extremely well...

16 other products in the same category:

Product added to wishlist
Product added to compare.