Grid panels of epoxy glass fiber laminate RA160 159 x 127 mm

Grid panels of epoxy glass fiber laminate RA160 159 x 127 mm

Grid panels of epoxy glass fiber laminate RA160 159 x 127 mm

Grid panels of epoxy glass fiber laminate RA160 159 x 127 mm

SHIPMENT IN 5-7 WORKING DAYS

€5.90

Tax included

No review at the moment

Estimated Shipping Costs

Shipping Costs

€12.60

Shipping Time

.

Want to check another country or courier?

Grid panels of epoxy glass fiber laminate RA160 159 x 127 mm

Grid plates

If you do not want copper tracks, there are grid plates made of epoxy-glass fiber laminate, where you place the components on one side and connect the wires on the back.
The grid plates are available in different sizes, all have a grid dimension (= hole spacing) of 5 mm.

Reference RA160

In stock 8 Items

13 other products in the same category:

Mundorf M-reu30-cool for M-Resist Ultra MREU30 30W

AVAIBLE ON ORDER

High-load cement resistors

Mundorf M-reu30-cool for M-Resist Ultra MREU30 30W

0 review

Mundorf M-reu30-cool for M-Resist Ultra MREU30 30W THIS PRODUCT IS AVAIBLE ON ORDER .TIME OF SHIPMENT DEPEND FROM THE SUPPLIER We only sell the red aluminum heatsink, the resistor is optional and sold separately. The photo is for demonstration purposes only PRICE 1 off (each)

Grid panels of epoxy glass fiber laminate RA140 140 x 102 mm

SHIPMENT IN 5-7 WORKING DAYS

Circuit Board

Grid panels of epoxy glass fiber laminate RA140 140 x 102 mm

0 review

Grid panels of epoxy glass fiber laminate RA140 140 x 102 mm The grid plates are available in different sizes, all have a grid dimension (= hole spacing) of 5 mm.

PCB02 - Audikom PCB for crossover filters - 17x22cm

PCB02 - Audikom PCB for crossover filters - 17x22cm 2

SHIPMENT IN 5-7 WORKING DAYS

Circuit Board

PCB02 - Audikom PCB for crossover filters - 17x22cm

0 review

PCB02 - Audikom PCB for crossover filters - 17x22cm PCB01 has been designed for the prototyping and assembly of crossover filters.

Black Perforated Crossover Board | Pair | 12,70 x 17,78 cm

Black Perforated Crossover Board | Pair | 12,70 x 17,78 cm 2

SHIPMENT IN 5-7 WORKING DAYS

Circuit Board

Black Perforated Crossover Board | Pair | 12,70 x 17,78 cm

White Perforated Crossover Board

0 review

Black Perforated Crossover Board | Pair | 12,70 x 17,78 cm Designed with speaker builders in mind, these red perforated phenolic boards are perfect for passive crossover designs. The large 0.07" (1.7 mm) perforations will accept up to 14 gauge solid wire allowing you easily install most inductors, capacitors, and resistors. Sold in pairs.

PCB01 - Audikom PCB for crossover filters - 10x15cm

PCB01 - Audikom PCB for crossover filters - 10x15cm 2

SHIPMENT IN 5-7 WORKING DAYS

Circuit Board

PCB01 - Audikom PCB for crossover filters - 10x15cm

0 review

PCB01 - Audikom PCB for crossover filters - 10x15cm PCB01 has a size of 10x15 cm and allows the assembly of a small two-way bi-wiring or three-way mono-wiring filter.

White Perforated Crossover Board | Pair | 12,70 x 17,78 cm

White Perforated Crossover Board | Pair | 12,70 x 17,78 cm 2

Out-of-Stock

Circuit Board

White Perforated Crossover Board | Pair | 12,70 x 17,78 cm

Black Perforated Crossover Board

0 review

White Perforated Crossover Board | Pair | 12,70 x 17,78 cm Designed with speaker builders in mind, these white perforated phenolic boards are perfect for passive crossover designs. The large 0.07" (1.7 mm) perforations will accept up to 14 gauge solid wire allowing you easily install most inductors, capacitors, and resistors. Sold in pairs.

View

Perforated PC Board | 7,94 x 10,95 cm Circuit Boards

SHIPMENT IN 5-7 WORKING DAYS

Circuit Board

Perforated PC Board | 7,94 x 10,95 cm Circuit Boards

White Perforated Crossover Board

0 review

Perforated PC Board | 7,94 x 10,95 cm Circuit Boards Perforated phenolic prototype board. These boards are pre-drilled for standard component wires at 0.1" x 0.1" on-center with independant solderable copper traces on one side of each hole.

Epoxy glass fiber laminate circuit board 150 x 115 mm

SHIPMENT IN 5-7 WORKING DAYS

Circuit Board

Epoxy glass fiber laminate circuit board 150 x 115 mm

0 review

Epoxy glass fiber laminate circuit board 150 x 115 mm Universal circuits or grid grids are ideal for creating crossovers.

Epoxy glass fiber laminate circuit board 220 x 155 mm

SHIPMENT IN 5-7 WORKING DAYS

Circuit Board

Epoxy glass fiber laminate circuit board 220 x 155 mm

0 review

Epoxy glass fiber laminate circuit board 220 x 155 mm with 35 µm Cu layer Universal circuits or grid grids are ideal for creating crossovers.

Grid panels of epoxy glass fiber laminate RA240 240 x 165 mm

SHIPMENT IN 5-7 WORKING DAYS

Circuit Board

Grid panels of epoxy glass fiber laminate RA240 240 x 165 mm

0 review

Grid panels of epoxy glass fiber laminate RA240 240 x 165 mm The grid plates are available in different sizes, all have a grid dimension (= hole spacing) of 5 mm.

PCB03 - Audikom PCB for crossover filters - 12x20cm

PCB03 - Audikom PCB for crossover filters - 12x20cm 2

SHIPMENT IN 5-7 WORKING DAYS

Circuit Board

PCB03 - Audikom PCB for crossover filters - 12x20cm

0 review

PCB03 - Audikom PCB for crossover filters - 12x20cm PCB03 has a size of 12x20cm and allows the assembly of a three-way bi-wiring or four-way mono-wiring filter of good complexity.

Black Perforated Crossover Board | Pair | 8,89 x 12,70 cm

Black Perforated Crossover Board | Pair | 8,89 x 12,70 cm 2

SHIPMENT IN 5-7 WORKING DAYS

Circuit Board

Black Perforated Crossover Board | Pair | 8,89 x 12,70 cm

Black Perforated Crossover Board

0 review

Black Perforated Crossover Board | Pair | 8,89 x 12,70 cm Designed with speaker builders in mind, these black perforated phenolic boards are perfect for passive crossover designs. The large 0.07" (1.7 mm) perforations will accept up to 14 gauge solid wire allowing you easily install most inductors, capacitors, and resistors. Sold in pairs.

PC Board M3 Standoff Kit - for crossover - amplifier board

SHIPMENT IN 5-7 WORKING DAYS

Circuit Board

PC Board M3 Standoff Kit - for crossover - amplifier board

0 review

PC Board M3 Standoff Kit - for crossover - amplifier board This standoff kit is perfect for stacking multiple PC boards that are the same size and work with all Dayton Audio or Sure Electronics amplifier boards. They also help secure PC boards inside project boxes.

Customers who bought this product also bought:

Grid panels of epoxy glass fiber laminate RA240 240 x 165 mm

SHIPMENT IN 5-7 WORKING DAYS

Circuit Board

Grid panels of epoxy glass fiber laminate RA240 240 x 165 mm

0 review

Grid panels of epoxy glass fiber laminate RA240 240 x 165 mm The grid plates are available in different sizes, all have a grid dimension (= hole spacing) of 5 mm.

Jantzen Audio Air Core Wire Coil 17awg 0.02 to 24mH

Jantzen Audio Air Core Wire Coil 17awg 0.02 to 24mH 2

AVAIBLE ON ORDER

Air coils

Jantzen Audio Air Core Wire Coil 17awg 0.02 to 24mH

0 review

Jantzen Audio Air Core Wire Coil 17awg 0.02 to 24mH To select the version go to the drop-down menu here below THIS PRODUCT IS AVAIBLE ON ORDER .TIME OF SHIPMENT DEPEND FROM THE SUPPLIER

Jantzen Audio Cross Cap MKP 0,10 to 330µF 400V

Jantzen Audio Cross Cap MKP 0,10 to 330µF 400V 2

AVAIBLE ON ORDER

MKP film capacitors

Jantzen Audio Cross Cap MKP 0,10 to 330µF 400V

0 review

Jantzen Audio Cross Cap MKP 0,10 to 330µF 400V THIS PRODUCT IS AVAIBLE ON ORDER .TIME OF SHIPMENT DEPEND FROM THE SUPPLIER Available with different values .From 0.10 to 330µF To select the version go to the drop-down menu here below

Grid panels of epoxy glass fiber laminate RA140 140 x 102 mm

SHIPMENT IN 5-7 WORKING DAYS

Circuit Board

Grid panels of epoxy glass fiber laminate RA140 140 x 102 mm

0 review

Grid panels of epoxy glass fiber laminate RA140 140 x 102 mm The grid plates are available in different sizes, all have a grid dimension (= hole spacing) of 5 mm.

Mundorf MResist Supreme 20W 2% 0.1 to 33 ohm

Mundorf MResist Supreme 20W 2% 0.1 to 33 ohm 2

SHIPMENT IN 5-7 WORKING DAYS

High-load cement resistors

Mundorf M-Resist Supreme 20W 2% 0.1 to 33 ohm

0 review

Mundorf M-Resist Supreme 20W 2% 0.1 to 33 ohm Available with different resistance values (ohm). Values from 0.1 to 33 ohms. To select the impedance go to the drop-down menu here below

SB ACOUSTICS SB26STAC-C000-4 Tweeter 26mm

SB ACOUSTICS SB26STAC-C000-4 Tweeter 26mm 2

SHIPMENT IN 7-10 WORKING DAYS

Hi-Fi Tweeter

SB ACOUSTICS SB26STAC-C000-4 Tweeter 26mm

SB26STAC-C000-4

0 review

SB ACOUSTICS SB26STAC-C000-4 Tweeter 26mm The SB Acoustics SB26STAC-C000-4 is a 4 ohm coated textile dome tweeter using a 1” voice coil together with copper cap pole piece. The 100mm aluminum faceplate enhances the sturdy build quality and looks.

Customers who bought this product also bought:

Mundorf MResist Supreme 20W 2% 0.1 to 33 ohm

Mundorf MResist Supreme 20W 2% 0.1 to 33 ohm 2

SHIPMENT IN 5-7 WORKING DAYS

High-load cement resistors

Mundorf M-Resist Supreme 20W 2% 0.1 to 33 ohm

0 review

Mundorf M-Resist Supreme 20W 2% 0.1 to 33 ohm Available with different resistance values (ohm). Values from 0.1 to 33 ohms. To select the impedance go to the drop-down menu here below

Grid panels of epoxy glass fiber laminate RA140 140 x 102 mm

SHIPMENT IN 5-7 WORKING DAYS

Circuit Board

Grid panels of epoxy glass fiber laminate RA140 140 x 102 mm

0 review

Grid panels of epoxy glass fiber laminate RA140 140 x 102 mm The grid plates are available in different sizes, all have a grid dimension (= hole spacing) of 5 mm.

Grid panels of epoxy glass fiber laminate RA240 240 x 165 mm

SHIPMENT IN 5-7 WORKING DAYS

Circuit Board

Grid panels of epoxy glass fiber laminate RA240 240 x 165 mm

0 review

Grid panels of epoxy glass fiber laminate RA240 240 x 165 mm The grid plates are available in different sizes, all have a grid dimension (= hole spacing) of 5 mm.

Jantzen Audio Cross Cap MKP 0,10 to 330µF 400V

Jantzen Audio Cross Cap MKP 0,10 to 330µF 400V 2

AVAIBLE ON ORDER

MKP film capacitors

Jantzen Audio Cross Cap MKP 0,10 to 330µF 400V

0 review

Jantzen Audio Cross Cap MKP 0,10 to 330µF 400V THIS PRODUCT IS AVAIBLE ON ORDER .TIME OF SHIPMENT DEPEND FROM THE SUPPLIER Available with different values .From 0.10 to 330µF To select the version go to the drop-down menu here below

SB ACOUSTICS SB26STAC-C000-4 Tweeter 26mm

SB ACOUSTICS SB26STAC-C000-4 Tweeter 26mm 2

SHIPMENT IN 7-10 WORKING DAYS

Hi-Fi Tweeter

SB ACOUSTICS SB26STAC-C000-4 Tweeter 26mm

SB26STAC-C000-4

0 review

SB ACOUSTICS SB26STAC-C000-4 Tweeter 26mm The SB Acoustics SB26STAC-C000-4 is a 4 ohm coated textile dome tweeter using a 1” voice coil together with copper cap pole piece. The 100mm aluminum faceplate enhances the sturdy build quality and looks.

Jantzen Audio Air Core Wire Coil 17awg 0.02 to 24mH

Jantzen Audio Air Core Wire Coil 17awg 0.02 to 24mH 2

AVAIBLE ON ORDER

Air coils

Jantzen Audio Air Core Wire Coil 17awg 0.02 to 24mH

0 review

Jantzen Audio Air Core Wire Coil 17awg 0.02 to 24mH To select the version go to the drop-down menu here below THIS PRODUCT IS AVAIBLE ON ORDER .TIME OF SHIPMENT DEPEND FROM THE SUPPLIER

Products from the same brand
AVAIBLE ON ORDER

Air coils

AirCore Coil Mundorf L100 0,10 to 10,0 mH 0,14 to 1,9 OHM

MUNDORF

Mundorf L100

0 review

€6.60

AirCore Coil Mundorf L100 0,10 to 10,0 mH 0,14 to 1,9 OHM THIS PRODUCT IS AVAIBLE ON ORDER .TIME OF SHIPMENT DEPEND FROM THE SUPPLIER Available with different resistance values (ohm).Values from 0.14 to 1,9 ohms. To select the impedance go to the drop-down menu here below
AVAIBLE ON ORDER

Air coils

AirCore Coil Mundorf L140 0,10mH to 10mH 0,07 to 1,2ohm

MUNDORF

L140

0 review

€9.82

AirCore Coil Mundorf L140 0,10mH to 10mH 0,07 to 1,2ohm THIS PRODUCT IS AVAIBLE ON ORDER .TIME OF SHIPMENT DEPEND FROM THE SUPPLIER Available with different resistance values (ohm).Values from 0.07 to 1,2 ohms. To select the impedance go to the drop-down menu here below
AVAIBLE ON ORDER

Air coils

AirCore Coil Mundorf L50 0,10 to 4,7mH 0,36 to 3,9 Ohm

MUNDORF

AirCore Coil Mundorf L50

0 review

€4.20

AirCore Coil Mundorf L50 0,10 to 4,7mH 0,36 to 3,9 Ohm THIS PRODUCT IS AVAIBLE ON ORDER .TIME OF SHIPMENT DEPEND FROM THE SUPPLIER Available with different resistance values (ohm).Values from 0.36 to 3,9 ohms. To select the impedance go to the drop-down menu below the price
AVAIBLE ON ORDER

Air coils

AirCore Coil Mundorf L71 0,050 to 27,0 mH 0,19 to 6,0 OHM

MUNDORF

L71

0 review

€3.90

AirCore Coil Mundorf L71 0,050 to 27,0mH 0,19 to 6,0 Ohm THIS PRODUCT IS AVAIBLE ON ORDER .TIME OF SHIPMENT DEPEND FROM THE SUPPLIER Available with different resistance values (ohm).Values from 0.19 to 4,5 ohms. To select the impedance go to the drop-down menu here below
SHIPMENT IN 5-7 WORKING DAYS

Circuit Board

Grid panels of epoxy glass fiber laminate RA240 240 x 165 mm

MUNDORF

ra240

0 review

€8.60

Grid panels of epoxy glass fiber laminate RA240 240 x 165 mm The grid plates are available in different sizes, all have a grid dimension (= hole spacing) of 5 mm.
SHIPMENT IN 7/10 WORKING DAYS

Speakers Cables for Home HIFI

Mundorf ACS1050BU Angelique® Copper Stranded Single Speaker Wire

MUNDORF

Mundorf ACS1050BU

0 review

€4.95

Mundorf ACS1050BU Angelique®Copper Stranded Single Speaker Wire The Mundorf ACS1050BU Angelique Speaker Wire is a high-end audio cable designed for audiophiles who seek superior sound quality. This wire is made from a special Angelique®Copper alloy, which includes copper, silver, and gold to enhance its conductivity and overall audio performance.
SHIPMENT IN 7/10 WORKING DAYS

Speakers Cables for Home HIFI

Mundorf ACS1050GY Angelique® Copper Stranded Single Speaker Wire

MUNDORF

Mundorf ACS1050GY

0 review

€4.95

Mundorf ACS1050GY Angelique® Copper Stranded Single Speaker Wire The Mundorf ACS1050GY Angelique Speaker Wire is a high-quality audio cable designed for audiophiles seeking exceptional sound clarity and performance. This wire features a unique alloy of copper enriched with silver and gold, enhancing its electrical conductivity and sound quality.
SHIPMENT IN 7/10 WORKING DAYS

Speakers Cables for Home HIFI

Mundorf ACS1150GY Angelique® Copper Single Speaker Wire

MUNDORF

Mundorf ACS1150GY

0 review

€12.90

Mundorf ACS1150GY Angelique®Copper Stranded Single Speaker Wire The Mundorf ACS1150GY Angelique Speaker Wire is a premium audio cable designed for high-fidelity applications, combining the best qualities of copper, silver, and gold to deliver exceptional sound performance. This wire is ideal for audiophiles seeking superior audio clarity and precision.
SHIPMENT IN 7/10 WORKING DAYS

Speakers Cables for Home HIFI

Mundorf ACS1250BU Angelique®Copper Stranded Single Speaker Wire

MUNDORF

Mundorf ACS1250BU

0 review

€21.95

Mundorf ACS1250BU Angelique®Copper Stranded Single Speaker Wire The Mundorf ACS1050BU Angelique Speaker Wire is a high-end audio cable designed for audiophiles who seek superior sound quality. This wire is made from a special Angelique®Copper alloy, which includes copper, silver, and gold to enhance its conductivity and overall audio performance.
SHIPMENT IN 7/10 WORKING DAYS

Speakers Cables for Home HIFI

Mundorf ACS1250GY Angelique® Copper Stranded Single Speaker Wire

MUNDORF

Mundorf ACS1250GY

0 review

€21.95

Mundorf ACS1250GY Angelique® Copper Stranded Single Speaker Wire The Mundorf ACS1250GY Angelique Speaker Wire is a high-end audio cable designed for audiophiles who demand the best in sound quality and performance. This wire combines the excellent electrical properties of copper, silver, and gold to ensure superior audio transmission.
SHIPMENT IN 7/10 WORKING DAYS

Speakers Cables for Home HIFI

Mundorf ACS2050GY/BU Angelique® Copper Stranded Twisted Pair Speaker Wire

MUNDORF

Mundorf ACS2050GY/BU

0 review

€11.90

Mundorf ACS2050GY/BU Angelique®Copper Stranded Twisted Pair Speaker Wire The Mundorf ACS2050GY/BU Angelique Twisted Speaker Wire is a premium audio cable designed for high-fidelity sound applications. It is constructed using the proprietary Angelique®Copper, an alloy of copper, silver, and gold, which enhances its electrical conductivity and sound quality.
SHIPMENT IN 7/10 WORKING DAYS

Speakers Cables for Home HIFI

Mundorf ACS2150GY/BU Angelique® Copper Stranded Twisted Pair Speaker Wire

MUNDORF

Mundorf ACS2150GY/BU

0 review

€29.95

Mundorf ACS2150GY/BU Angelique®Copper Stranded Twisted Pair Speaker Wire The Mundorf ACS2150GY/BU Angelique Twisted Speaker Wire is a high-quality audio cable specifically designed for audiophiles seeking superior sound clarity and performance. This wire utilizes the unique Angelique®Copper alloy, which incorporates copper, silver, and gold to enhance its...

Product added to wishlist

Product added to compare.