Mundorf H71 H Core Coil 1 to 33mh 0,25 to 1,9 ohm Ferrite

Mundorf H71 H Core Coil 1 to 33mh 0,25 to 1,9 ohm Ferrite

Available with different resistance values ​​(ohm).Values ​​from 0.25 to 1,9 ohms.

To select the impedance go to the drop-down menu  below the price

With the ferrite material HO 3616 Mundorf meets the wishes of many users for an inexpensive and at the same time heavy-duty ferrite material. The mechanical advantages of these relatively small coils are obvious. However, only a few materials meet the high demands in terms of resilience and distortion behavior. The material HP 3616 used by Mundorf and manufactured in Germany clearly distinguishes it from the widely used inexpensive Far East cores. The H series combines inexpensive electrical and mechanical data with relatively low costs.

Enameled wire spools of this type can be found below (their order number begins with "B".)

Note: The following performance data Pmax were determined in an ambient temperature of 20 degrees and 50 Hz with free air exchange (free convection). These are guidelines! Since we do not produce the coils, we can do it