VAN DEN HUL AES-EBU XLR 110 ohm PROFESSIONAL

1 single cable 

The AES-EBU committee has set the characteristic impedance for professional balanced digital signal transmission at 110 Ohm. World-wide this typical value is accepted as the standard impedance for professional balanced digital audio transfer. To meet this requirement, already since 1990 our company has been designing high quality balanced 110 Ohm interface cables. The ultimate result is our AES-EBU 110 Ohm Professional cable which provides a superior digital signal transmission quality.

.

The major design criteria with this cable have been:

To provide a stable and precise 110 Ohm transmission line impedance.

To provide a very high frequency bandwidth as well as minimal signal attenuation.

To provide a very high shielding factor against interference due to external electromagnetic fields.

The prevention of material deterioration brought about by external factors, like polluted air or mechanical causes.

.

Details:

The AES-EBU 110 Ohm Professional’s internal balanced construction contains two solid core centre conductors each consisting of a 0.75 mm solid core lead, made of high purity dense silver coated high purity matched crystal Oxygen Free Copper (OFC).

Each lead exhibits a resistance of 4.0 Ohm/100 meter.

The capacitance between both leads is very low: 47 pF/m.

The two centre conductors’ respective red and transparent insulation is made of dense polyethylene, which together with their dense silver coating provides extra protection against external mechanical and corrosive aging factors.

To provide a stable and precise 110 Ohm transmission line impedance, the centre conductors’ combined dense polyethylene insulation and mild 60 mm lay maintains a solid balanced line geometry. In addition, specially treated fibres are used as internal fillers. These act to further stabilise the geometry and furthermore render the cable insensitive to humidity penetration and any resulting impedance deviations or transmission losses.

.

The AES-EBU 110 Ohm Professional’s cable screen consists of four layers:

• An aluminum tape beneath a braid of 120 high grade OFC wires with a dense pure silver coating,
• this beneath another aluminum tape and a Linear Structured Carbon ® (LSC) saturated outer layer.
• The resistance of the combined screens is 0.81 Ohm/100 meter.