Markaudio Alpair-6 Gold 3.5" Full Range Woofer
Price for 1 piece
-
Product description
The Alpair-6 is well suited to smaller audio applications, particularly desk-top and nearfield uses. The bass-rich warm tone of this driver can act a balance for those installations using compressed or highly processed source music, complements the use of traditional and modern solid-state amplification. This new generation 2 model concentrates on refining the musicality of the Alpair-6 heritage.
-
Highlights
Latest-model
New Multi-form cone design allows improvement of vocal clarity in the lower/lower mid-frequency ranges
New advanced Nomex rear suspension
New ultra-lightweight copper wound coil
New connector sets allow for remote soldering of cables making installation easy
Built-in overload protection (arrestor in motor sub-assembly)
-
Product details
Markaudio Alpair-6 Gold 3.5" Full Range Woofer
The Alpair 6 has a mechanical X Max (1 way) of 5.5 mm (in flux). This feature is only designed to handle non-linear “peak-shock” loads, for example, the brief roll of a drum beat. For optimum movement, loads NOT exceeding 3.00 mm is within its capability for a period not exceeding 1.5 hours. The normal driven movement should remain inside 2.6 mm. For a driver of this size, this normal load X-max is generous; Together with a well-matched cabinet, a pleasing bass response can be generated.
This new generation 2 driver has a new Multi-form cone design. The cone profile has been modified to improve vocal clarity in the lower/lower mid-frequency ranges. New advanced Nomex rear suspension and a new low mass copper wound coil are also included in this design. Other additional features include a revision of the polymer mix for the frame making it 10% stiffer than the old model. Lastly, the new connector sets allow for remote soldering of cables, making installation easy.
.
Specifications
- Article number Alpair-6 Gold
- Woofer Series Alpair Series
- Woofer Type Full-range
- Nominal Diameter 3.5"
- Power Handling (RMS) 15 Watts
- Power Handling (max) 30 Watts
- Impedance (Z) 4 ohms
- Sensitivity 85.4 dB 2.83V/1m
- Voice Coil Diameter 0.7"
- DC Resistance (Re) 3.6 ohms
- Resonant Frequency (Fs) 63 Hz
- Mechanical Q (Qms) 2.76
- Electromagnetic Q (Qes) 0.45
- Total Q (Qts) 0.38
- Mechanical Compliance of Suspension (Cms) 2.58 mm/N
- BL Product (BL) 2.81 Tm
- Compliance Equivalent Volume (Vas) 0.16 ft.³
- Overall Outside Diameter 4.48"
- Overall Depth 2.07"
- Baffle Cutout Diameter 3.77"
- # Mounting Holes 4
Products from the same category
Products from the same brand