Auto Finesse Clay Bar kit for paint decontamination

.

Auto Finesse Clay Bar kit is a set of soft clay 200 g and lubricant 500 ml for perfect paint decontamination. A set of fine, soft clay of the highest quality with a medium-hard function suitable for all types of paint together with an extra lubricating grease with the possibility of dilution.

A large 200g clay bar made from fine, soft clay that is easy to use without any damage to the paintwork. Seasoned pros will also appreciate its consistency and effectiveness. The Detailing Clay Bar is ideal for all types of paint, combined with Glide clay bar lube you will be able to achieve a clean smooth finish with ease. This product should probably be one of the first in your detailing kit.

Auto Finesse Glide was formulated specifically to work in conjunction with Auto Finesse Clay Bar. Its special blend of long-lasting lubricant allows the clay to glide over the paint surface with ease, like a well-oiled ball bearing.

Clay removes organic and inorganic bonded contaminants without the use of any chemicals. This ability helps restore the shine that has been hidden by dirt. You will then improve the effectiveness of all subsequent detailing steps. This is what makes claying so important, and why Auto Finesse put so much energy into developing the Auto Finesse Clay Bar. The Auto Finesse Detailing Clay Bar is a giant lump of clay with a soft feel but the effectiveness of a medium-

hard clay.

Unlike other conventional clays, Auto Finesse Clay Bar does not crumble and leaves absolutely no streaks. Its soft character with the high efficiency of a medium-hard clay is unique in the world.

.

.

How to use the Auto Finesse Clay Bar kit

• Wash the car carefully .
• Tear off a small piece of clay and flatten it into a patty.
• Either dilute Glide in a mixing bottle or keep it in concentrate.
• Spray Glide onto an area of ​​approximately 40x40 cm.
• Glide the clay over the surface using vertical and then horizontal movements.
• Once the decontaminated area is clean, wipe away any remaining lubricant with a soft cloth.and move on to the next section.

Note: The dilution rate of the lubricant depends on the degree of contamination, the hardness of the paint and, last but not least, the hardness of the clay used. When using this Clay Bar from Auto Finesse, you can dilute up to a ratio of 1:10 in the case of routine maintenance. For heavy contamination, we recommend a dilution of a maximum of 1:5.

Our TIP: To achieve maximum claying efficiency in the shortest time, you can use Auto Finesse Iron Out as a lubricant . In this case, the car will need to be washed again after decontamination. You can learn more in our blog in the complete topic about car decontamination .

.

Specifications

• 200 g clay 
• 500 ml lubricant