The C Class 2-Way Component Speaker System is the perfect balance of high-fidelity refinement and value. Mid-Woofer: The 6.5-in mid-woofer features a cast aluminum frame and an aluminum cone coupled with a soft rubber dustcap and surround. This combination results in an acoustically well-balanced speaker that offers superb frequency response while exhibiting warm tonal characteristics. Additionally, for reduced inductance, extended high-frequency roll-off, and increased efficiency the voice coils feature a double slit former and the motor utilizes a copper pole cap. Tweeter: The 28-mm cloth dome tweeter offers a wide/smooth frequency response. It features an attractive flush mount vented back machined aluminum housing. Crossover: The crossover networks are built with premium components, including Mylar capacitors and segmented air-core inductors. Selectable tweeter levels are provided for fine high-frequency tuning.

-

DIGITAL DESIGNS CC6.5a

SPECIFICATIONS:

Driver Size - in Woofer 6.5″ / Tweeter 28mm

Power Band - Watts 60-180

Impedance 4ohm

Frequency Response - Hz 50-20k

Mounting Diameter - Woofer 145,7mm/ Tweeter 48mm

Mounting Depth - Woofer 66.mm / Tweeter 12.7mm

-

DD Audio C2.100 System

The C-Series amplifiers have a warm sound typical of Class AB amplifiers. Splitter filters can be used in overpass, underpass and bandpass mode. Proper screw terminals for cables of sufficient size are located on the long side like all other equipment connections and adjustments. This makes cabling easier during installation.

A four-function protection circuit protects the amplifier from overvoltage, short circuits and overheating, and in the event of a fault, the speakers from direct current.

Sleek looks, plenty of power, good features and a fairly reasonable price tag make the DD Audio C-Series a good option.

A subwoofer level controller with cables is available as an accessory.

.

Technical data:

Output power RMS @ 4ohm 100x2 / 350x1

Output power RMS @ 2ohm 175x2

Max Current Draw - Amperage 40A

S / N Ratio: 86dB

THD 0.18%: 8V-0.25V

Input Voltage Sensitivity: 8V-0.25V

Pass-Through Output: Yes

Remote Subwoofer Control: Yes, optional

Power terminals wire size: 25mmq

Speaker terminals wire size: 2.5 mmq

Dimensions: 308 x 175 x 54 mm

.

Specifications

DD C2.100

Signal To Noise Ratio

86dB

Input Sensitivity

8 - 0,25V

Power Terminal Gauge

4 GA (20mm²)

Operational Voltage

9V - 16V

Dimensions 308x175x54 mm

Power @ 4Ω 14,4v 1% THD 2 x 100 W

Power @ 2Ω 14,4v 1% THD 2 x 175 W

Power @ 4Ω Bridge 14,4v 1% THD 1 x 350 W

Number Of Channels 2 Channel