- New
GRS 8SW-4HE-8 Paper Cone Rubber Surround Subwoofer
GRS 8SW-4HE-8 Paper Cone Rubber Surround High-Excursion Subwoofer 4 Ohm
The versatile 8SW-4HE 8” high excursion subwoofer from GRS is designed to produce excellent low frequency extension in a variety of designs. Suitable for both sealed and vented enclosures, this driver the ideal replacement or upgrade for your existing subwoofers with worn out or blown drivers.
GRS 8SW-4HE-8 Paper Cone Rubber Surround High-Excursion Subwoofer 4 Ohm
The versatile 8SW-4HE 8” high excursion subwoofer from GRS is designed to produce excellent low frequency extension in a variety of designs. Suitable for both sealed and vented enclosures, this driver the ideal replacement or upgrade for your existing subwoofers with worn out or blown drivers. Featuring extensive venting, rubber surround, high temperature voice coil, low Fs, and 10.5 mm of excursion the 8SW-4HE is built for remarkable bass response on a budget.
.
Product highlights:
- High excursion and low Fs to produce powerful low frequency output
- 2” voice coil on a thick aluminum former to handle up to 150 watts RMS
- Venting under the spider, through the pole piece, and in the magnetic gap for excellent heat dissipation
- Durable reinforced paper cone with rubber surround produces reliable and consistent performance
- Extended frame and bumped back plate allow ample clearance for high excursion
.
Product details
Key Specs:
- Nominal Diameter: 8"
- Power Handling (RMS): 150W
- Power Handling (MAX): 300W
- Impedance: 4 Ω
- Frequency Response: 30-700Hz
- Sensitivity: 85dB 2.83V/1m
- Voice Coil Diameter: 2"
- Maximum Linear Excursion: 10.8mm
.
Frequency Response & Impedance Curve
the GRS 8SW-4HE has a bass-centric response from 30Hz up to 700Hz and is highly efficient within its passband. This efficiency and a low QTS lends itself well to both vented and sealed subwoofers for incredibly deep bass from an 8-inch driver.
Extensive venting through the frame, pole piece, and magnetic gap dissipates excess heat to keep power compression to a minimum, even when driven hard for long periods. The rigid paper cone is supported by a large diameter spider and rubber surround to keep excursion linear while providing reliable performance. With a high temperature 2” voice coil wound on a thick aluminum former the 8SW-4HE can comfortably handle up to 150 watts RMS of power.
.
Technical Specifications:
- Article number 8SW-4HE-8
- Woofer Type Subwoofer
- Nominal Diameter 8"
- Power Handling (RMS) 150 Watts
- Power Handling (max) 300 Watts
- Impedance (Z) 4Ω
- Sensitivity (SPL at 1m / 2.83V) 85 dB
- Frequency Response 30 to 700HzHz
- Voice Coil Diameter 2"
- Magnet Weight 1,6 Kg
- DC Resistance (Re) 3.8Ω
- Voice Coil Inductance (Le) 2.7mH
- Resonant Frequency (Fs) 24.9 Hz
- Mechanical Q (Qms) 4.42
- Electromagnetic Q (Qes) 0.51
- Total Q (Qts) 0.45
- Diaphragm Mass Inc. Airload (Mms) 93.7g
- Mechanical Compliance of Suspension (Cms) 0.44mm/N
- Surface Area of Cone (Sd) 227cm²
- BL Product (BL) 10.5T·m
- Compliance Equivalent Volume (Vas) 1.12ft³
- Maximum Linear Excursion (Xmax) 10.8 mm
- Cone / Diaphragm Material Coated Paper
- Surround Material Rubber
- Voice Coil Wire Material Copper
- Voice Coil Former Aluminum
- Basket / Frame Material Steel
- Magnet Material Ferrite
- Overall Outside Diameter 8.22"
- Overall Depth 4.6"
- Baffle Cutout Diameter 7.6"
- Bolt Circle Diameter 7.8
- # Mounting Holes 8
- Sealed Volume 0.5ft³
- Sealed F3 46Hz
- Vented Volume 1ft³ Vented F3 27Hz
Products from the same category
Products from the same brand