Your cart
There are no more items in your cart- -5%
You might also like
NOMINAL SPECIFICATIONS
Nominal Diameter | 250 mm (10 in) |
Overall Diameter | 261 mm (10.28 in) |
Bolt Circle Diameter | 246 mm (9.69 in) |
Baffle Cutout Diameter | 230 mm (9.06 in) |
Depth | 130 mm (5.12 in) |
Flange and Gasket Thickness | 11.5 mm (0.45 in) |
Net Weight | 7.5 Kg (16.5 lb) |
Shipping Box (Single Carton Box) | 294 x 290 x 203 mm (11.6 x 11.4 x 8.0 in) |
Shipping Weight | 8 Kg (17.6 lb) |
TECHNICAL PARAMETERS
Nominal Impedance | 8 Ohm |
Minimum Impedance | 6.4 Ohm |
AES Power Handling (1) | 500 W |
Maximum Power Handling (2) | 1000 W |
Sensitivity (1W/1m) | 97 dB |
Frequency Range | 60÷4000 Hz |
Voice Coil Diameter | 77 mm (3 in) |
Winding Material | Al |
Former Material | Glass Fiber |
Winding Depth | 18.5 mm (0.73 in) |
Magnetic Gap Depth | 10.5 mm (0.41 in) |
Flux Density | 1.2 T |
Magnet | Ferrite Ring |
Basket Material | Aluminum |
Demodulation | Aluminum Ring |
Cone Surround (3) | Triple Roll |
NET Air Volume filled by Loudspeaker | 2 dm^3 (0.071 ft^3) |
Spider Profile | 1x variable height waves |
THIELE AND SMALL PARAMETERS
Fs | 60 Hz |
Re | 5.1 Ohm |
Qes | 0.25 |
Qms | 12.4 |
Qts | 0.25 |
Vas | 23.5 dm^3 (0.83 ft^3) |
Sd | 347 cm^2 (53.79 in^2) |
Xmax (4) | 7.50 mm |
Xdamage (5) | 18.8 mm |
Mms | 50.3 g |
Bl | 19.5 N/A |
Le | 0.8 mH |
Mmd | 43.0 g |
Cms | 0.14 mm/N |
Rms | 1.5 Kg/s |
Eta Zero | 1.94 % |
EBP | 240 Hz |
QUICK MECHANICAL SPECS
Nominal Diameter | 250 mm (10 in) |
Overall Diameter | 261 mm (10.28 in) |
Bolt Circle Diameter | 246 mm (9.69 in) |
Baffle Cutout Diameter | 230 mm (9.06 in) |
Depth | 130 mm (5.12 in) |
Flange and Gasket Thickness | 11.5 mm (0.45 in) |
Net Weight | 7.5 Kg (16.5 lb) |
Shipping Box (Single Carton Box) | 294 x 290 x 203 mm (11.6 x 11.4 x 8.0 in) |
Shipping Weight | 8 Kg (17.6 lb) |
You might also like
Save products on your wishlist to buy them later or share with your friends.
With our cookies offer you a simply and fast shopping experience.This remember you special offers and your preferences of navigation . If that is okay with you, you agree to the use of cookies for your preferences simply by clicking on "accept"
By closing this banner, scrolling this page, clicking on a link or continuing to browse in any other way, you consent to the use of cookies.