- New
- Home
- Car Audio
- Car Speakers
- Car Amplifier & Power
- Car Subwoofers
- DSP Digital Sound Processors
- Car Audio Package
- Car Stereos & Radios
- Accessories & Install
- Hifi Home
- Home Speakers
- Amplifiers Home Hifi
- Turntable
- Pickups MM MC
- Phono Preamplifier
- Cd Player - SACD
- DAC
- Network receiver
- Tuner
- Headphones Amplifiers
- Headphones
- Cables
- Cable Sheaths
- Connectors
- Crossovers
- DIY Kits
- Amplifier modules
- Vibration Dampers for Electronics and Loudspeakers
- Wireless speakers
- Soundbar
- Compact system
- Outdoor Speakers
- Marine Audio
- Speakers Technical
- Pro Audio
- Playback and recording equipment
- Amplifiers and PA amplifiers
- Mixing consoles
- Powermixer
- PA boxes active
- PA boxes passive
- Signal processing
- Microphones
- **LIGHTNING TECHNOLOGY**
- **CABLES & CONNECTORS**
- Microphone cable
- Audio cable and distributor / adapter
- Audio connectors
- Speaker cable
- Video and antenna cable adapters and accessories
- HDMI cable and distributor / adapter
- DMX cable
- USB cable and adapter
- Network cables, adapters and accessories
- Fiber optic cable and adapter
- MIDI and DIN cable / adapter
- Power cables, distributors and plugs
- Other connectors and adapters
- Cable reel ware
- Mounting fittings
- TourGuide - Operation guidance systems
- Radio microphones and audio systems
- Stands and holders
- headphone
- Multicore cables and cable management
- Adhesive tapes and attachments
- Flightcase, rack and accessories
- equipment
- Sport & Free Time
- Flash Sale
Beyma 8CMV2 - Midwoofer 8" 8ohm 94dB 250W Ferrite
Beyma 8CMV2 - Midwoofer 8" 8ohm 94dB 250W Ferrite
This 8″ ferrite woofer delivers a program power of 500 Watts (250 Watt AES). The 8CMV2 offers higher output power with a linear and extended response with minimal distortion. This high-sensitivity “Made in Europe” speaker has a double roller suspension in treated fabric. It is particularly recommended for bass and midrange applications in compact bass reflex speakers.
You might also like
Beyma 8CMV2 - Midwoofer 8" 8ohm 94dB 250W Ferrite
This 8″ ferrite woofer delivers a program power of 500 Watts (250 Watt AES). The 8CMV2 offers higher output power with a linear and extended response with minimal distortion. This high-sensitivity “Made in Europe” speaker has a double roller suspension in treated fabric. It is particularly recommended for bass and midrange applications in compact bass reflex speakers.
.
Key Features:
- Power handling: 100W program power
- Sensitivity: 91 dB (1W / 1m)
- 1” copper voice coil
- Rubber surround
- Ferrite magnet The cast aluminum basket
- Flat response and low harmonic distortion
- Extended controlled displacement: Xmax ± 6.7 mm
- 20 mm peak-to-peak excursion before damage
.
Technical Specifcations:
- Nominal diameter 200mm 8in
- Rated impedance 8Ω
- Minimum impedance 6.4Ω
- Power capacity 50 WRMS
- Program power 100 W
- Sensitivity 91 dB 1W / 1m @ ZN
- Frequency range 30 - 6,000 Hz
- Recom. enclosure vol. 20/60L 0.7/2.1ft3
- Voice coil diameter 25.4mm 1in
- Bl factor 6.8 N/A
- Moving mass 0.021 kg
- Voice coil length 16 mm
- Air gap height 6mm
- Xdamage (peak to peak) 20 mm
Thiele-Small Parameters:
- Resonant frequency, fs 30 Hz
- D.C. Voice coil resistance, Re 5.5 Ω
- Mechanical Quality Factor, Qms 2.1
- Electrical Quality Factor, Qes 0.48
- Total Quality Factor, Qts 0.39
- Equivalent Air Volume to Cms, Vas 89.1 l
- Mechanical Compliance, Cms 1300 μm/N
- Mechanical Resistance, Rms 2kg/s
- Efficiency, η0 0.5%
- Effective Surface Area, Sd 0.022 m2
- Maximum displacement, Xmax4 6.7mm
- Displacement Volume, Vd 147 cm3
- Voice coil inductance, Le 0.5 mH
Mounting Information:
- Overall diameter 212 mm 8.3 in
- Bolt circle diameter 198 mm 7.8 in
- Baffle cutout diameter:
- - Front mount 181mm 7.1in
- Depth 89mm 3.5in
- Volume displaced by driver 1.5 l 0.05 ft3
- Net weight 1.3kg
- Shipping weight 1.5kg
You might also like
Products from the same category
Products from the same brand