Hifi Home

1
…
7
8
9
…
18

Dayton Audio XO3W-375/3K 3-Way Speaker Crossover 375/3,000 Hz

SHIPMENT IN 5-7 WORKING DAYS

Crossover

Dayton Audio XO3W-375/3K 3-Way Speaker Crossover 375/3,000 Hz

0 review

Dayton Audio XO3W-375/3K 3-Way Speaker Crossover 375/3,000 Hz

Perforated PC Board | 7,94 x 10,95 cm Circuit Boards

SHIPMENT IN 5-7 WORKING DAYS

Circuit Board

Perforated PC Board | 7,94 x 10,95 cm Circuit Boards

White Perforated Crossover Board

0 review

Perforated PC Board | 7,94 x 10,95 cm Circuit Boards Perforated phenolic prototype board. These boards are pre-drilled for standard component wires at 0.1" x 0.1" on-center with independant solderable copper traces on one side of each hole.

PC Board M3 Standoff Kit - for crossover - amplifier board

SHIPMENT IN 5-7 WORKING DAYS

Circuit Board

PC Board M3 Standoff Kit - for crossover - amplifier board

0 review

PC Board M3 Standoff Kit - for crossover - amplifier board This standoff kit is perfect for stacking multiple PC boards that are the same size and work with all Dayton Audio or Sure Electronics amplifier boards. They also help secure PC boards inside project boxes.

Mundorf LH60 litz wire ferrite core coil, OFC-copper ,backed varnish

AVAIBLE ON ORDER

Ferrite Coils

Mundorf LH60 litz wire ferrite core coil, OFC-copper ,backed varnish

Mundorf LL45 litz

0 review

Mundorf LH60 litz wire ferrite core coil, OFC-copper ,backed varnish THIS PRODUCT IS AVAIBLE ON ORDER .TIME OF SHIPMENT DEPEND FROM THE SUPPLIER M-LH60-082 - 0,82mH - 0,07 Ohm - 491W - 40x38mm If the air coils have too high a resistance or do not provide the required power, the H-core coils LH45 and LH60 offer a solution.

Mundorf CFS 10 i core coil 16 AWG / 4.9 mm2

AVAIBLE ON ORDER

Ferrite core coil

Mundorf CFS 10 i core coil 16 AWG / 4.9 mm2

0 review

Mundorf CFS 10 i core coil 16 AWG / 4.9 mm2 THIS PRODUCT IS AVAIBLE ON ORDER .TIME OF SHIPMENT DEPEND FROM THE SUPPLIER M-cfs10-47 4.7 Ohm 0.10 Ohm 70x0.07 mm 991W 59 x 150mm MCoil Laminated Core Coils combine both the typical low basic output distortions and the low internal resistance of Feron core coils with the enhanced dynamic in music performance...

Mundorf CFS 12 i core coil 16 AWG / 3.08 mm2

AVAIBLE ON ORDER

Ferrite core coil

Mundorf CFS 12 i core coil 16 AWG / 3.08 mm2

0 review

Mundorf CFS 12 i core coil 16 AWG / 3.08 mm2 THIS PRODUCT IS AVAIBLE ON ORDER .TIME OF SHIPMENT DEPEND FROM THE SUPPLIER M-cfs12-150 15.0 mH 0.36 Ohm 44x0.07mm 365 W 82 x 130mm MCoil Laminated Core Coils combine both the typical low basic output distortions and the low internal resistance of Feron core coils with the enhanced dynamic in music performance...

Mundorf CFS 14 i core coil 16 AWG / 1.54 mm2

AVAIBLE ON ORDER

Ferrite core coil

Mundorf CFS 14 i core coil 16 AWG / 1.54 mm2

0 review

Mundorf CFS 14 i core coil 16 AWG / 1.54 mm2 THIS PRODUCT IS AVAIBLE ON ORDER .TIME OF SHIPMENT DEPEND FROM THE SUPPLIER M-cfs14-22 2.2mH 0.16 Ohm 1.6mm 312W 45 x 96mm MCoil Laminated Core Coils combine both the typical low basic output distortions and the low internal resistance of Feron core coils with the enhanced dynamic in music performance of...

Mundorf CFS 16 i core coil 16 AWG / 0.81 mm2

AVAIBLE ON ORDER

Ferrite core coil

Mundorf CFS 16 i core coil 16 AWG / 0.81 mm2

0 review

Mundorf CFS 16 i core coil 16 AWG / 0.81 mm2 THIS PRODUCT IS AVAIBLE ON ORDER .TIME OF SHIPMENT DEPEND FROM THE SUPPLIER M-cfs16-15 1.5mH 0.19 Ohm 1.23 mm 154 W 37 x 66 mm MCoil Laminated Core Coils combine both the typical low basic output distortions and the low internal resistance of Feron core coils with the enhanced dynamic in music performance of...

PCB01 - Audikom PCB for crossover filters - 10x15cm

PCB01 - Audikom PCB for crossover filters - 10x15cm 2

SHIPMENT IN 5-7 WORKING DAYS

Circuit Board

PCB01 - Audikom PCB for crossover filters - 10x15cm

0 review

PCB01 - Audikom PCB for crossover filters - 10x15cm PCB01 has a size of 10x15 cm and allows the assembly of a small two-way bi-wiring or three-way mono-wiring filter.

Epoxy glass fiber laminate circuit board 220 x 155 mm

SHIPMENT IN 5-7 WORKING DAYS

Circuit Board

Epoxy glass fiber laminate circuit board 220 x 155 mm

0 review

Epoxy glass fiber laminate circuit board 220 x 155 mm with 35 µm Cu layer Universal circuits or grid grids are ideal for creating crossovers.

Epoxy glass fiber laminate circuit board 150 x 115 mm

SHIPMENT IN 5-7 WORKING DAYS

Circuit Board

Epoxy glass fiber laminate circuit board 150 x 115 mm

0 review

Epoxy glass fiber laminate circuit board 150 x 115 mm Universal circuits or grid grids are ideal for creating crossovers.

WBT-0800 - Pond All in Silver - 42g - Ø0.9mm

SHIPMENT IN 7-10 WORKING DAYS

Accessories

WBT-0800 - Pond All in Silver - 42g - Ø0.9mm

0 review

WBT-0800 - Pond All in Silver - 42g - Ø0.9mm High quality pond with 4% silver with a melting temperature of 180 ° C

Showing 85-96 of 213 item(s)

1
…
7
8
9
…
18

Product added to wishlist

Product added to compare.