DIGITAL DESIGNS M2c Amplifier mono

DD Audio M2c monophonic amplifier 1700W x 1 at 12V / 2400W x 1 at 14.4v
 
The fourth generation M2 connects with great power by a small and elegant chassis. The dual LV power supply helps M2c produce 1700 Watts of effective 12 Volt RMS power, over 2400 to 14.4 Volts and a dynamic power of 3400 Watts.
 
With compact dimensions, the design of the high-power system has become much simpler with the new M2c, which uses the 0 AWG power supply and the grounding inputs that allow you to optimize the flow of current to the amplifier. It also has RCA bolted on for durability.
 
For ease of installation and upgradability, M2c presents the Strap mode. When using Strap mode, it is possible to have two M2c in one installation and control the level settings of the Strapped amplifier from the main amplifier. You can also use a single remote gain to control both amps.
 
M2c is also supplied with the VM-RMT remote control. VM-RMT is a mini amplifier diagnostic center capable of mounting at your fingertips for real-time monitoring and performance adjustments. From this remote control, you have fine gain control, amplifier input voltage monitoring, and output clipping monitoring.

.

DD Audio M2c technical characteristics

Test Voltage 12 / 14.4
Channels 1
Cont Wattage @ 1ohm1,700x1 @ 12V / 2,400x1 @ 14.4V
Dynamic Wattage 3,500 x1
Max Current Draw - Amperage 250
S / N Ratio 100dB
THD <0.02%
Input Voltage Sensitivity 8 - 0.2
Pass-Through Output
Remote Subwoofer Control
Power Wire Guage In 1 x 0
Speaker Wire Gauge Out 10
Dimensions: 19.68 x 6.88 x 2.14 "
Dimensions: 500 x 175 x 54.5 mm
Shipping Weight 7 Kg

Type 1-channel amplifier
Crossover Yes
RMS power 4 Ohm Watt
Signal to noise ratio 100 dB S / N
RMS power 2 Ohm Watt
Harmonic distortion 0.02% THD
RMS power 1 Ohm 1x2.400 Watt
MAX absorption 250 Ampere
Dimension 500 x 175 x 54 mm