- On sale!
- -10%
MOSCONI Gladen PICO 6/8 DSP 6 channel digital
FOR EU CUSTOMERS
MOSCONI Gladen PICO 6/8 DSP 6 channel digital
Powerful compact power amplifier optimized for use on the factory radio. Six analog inputs up to 30V, flexible routing, 3x input EQ and delay
MOSCONI Gladen PICO 6/8 DSP 6 channel digital
6-channel DSP amplifier digital, 4 x 50 WRMS @ 4 Ohm + 2 x 90 WRMS @ 4 Ohm
Description
Powerful compact power amplifier optimized for use on the factory radio. Six analog inputs up to 30V, flexible routing, 3x input EQ and delay.With 4x50Wrms + 2x 90 / 120Wrms ideal for active and partially active systems, as well as classic front + rear + sub applications. With two digital inputs (SP-Dif and BT +) and two processed line-out, it is ready for the future.
Technical specifications
power | 4 x 50 WRMS @ 4 Ohm (cannot be bridged) 2 x 90 WRMS @ 4 Ohm (2 x 120 WRMS @ 2 Ohm) or 1 x 240 WRMS @ 4 Ohm 2 x 2 VRMS line outputs |
Dimensions | 150 x 133 x 45 mm |
Overview
hardware
Entry page:
- 4x analog inputs symmetrical (high-level) up to 30V.
- 2x analog inputs switchable high-level / low-level)
- 1x digital input SP-Dif optical (8kHz - 96kHz sampling rate)
- 1x Bluetooth port with SP-Dif - TTL (8kHz - 96kHz, e.g. for Mos_BTS Bluetooth streaming module) or Bluetooth extended digital audio port (BT +)
- (flexible 8kHz - 384kHz synchronous digital input for audio sources with 2 - 16 channels, direct DSP access without jitter, e.g. for MOS BTS96k BT streaming module or extended analog inputs)
DSP part:
- 294.912 MHz, 32-bit audio port, 64-bit core.
- Double Precision 56Bit filter calculation.
- 6144 SIMD instructions per sample at 48 kHz.
- ASRCs from 1: 8 up to 7.75: 1 ratio and 139 dB DNR
Exit page:
- 4x 50W loudspeaker output 3-ohm stable (cannot be bridged!)
- 2x 90W loudspeaker output 2-Ohm stable / bridgeable
- 2x 2Vrms line outputs
- 1x digital output optical (48kHz / 24Bit, fully masterable)
Control:
- 1x remote connector (analog, for RTC.2 potentiometer remote control)
- 1x Bluetooth control port (connection MOS-BT3.0 (app control), RC-Can (CAN bus control), MOS_USB2.0 (programming dongle)
- 1x remote out, 1x remote in, auto remote with high-level connection
- 1x USB port
- Extension of the signal path - bass, mids, treble controls
- Connections with MOLEX® plug-in contacts
- Very small size with little heat generation, ideally suited for installation behind cladding
Software
- 3x 9 band parametric input EQ (de-equalizing)
- 6x input delay 0 - 3ms / 0.01ms (De-Delay)
- 10x input level control digital (signal conditioning)
- Flexible mixer for signal routing (separate sides, can add and subtract, 10 inputs on 4x2 output groups)
- 6x 30 band or 4x30 band + 2x15 band group EQ (parametric, relative phase remains stable)
- 12x 10 band output filters
- HighPass / LowPass / HighShelf / LowShelf / Notch / Allpass 1st + 2nd order / Speaker-EQ)
- 12x speaker delay 0 - 12ms, 0.02ms
- 12x speaker phase switch.
Customers who bought this product also bought:
GLADEN EXT2RCA adapter cable for PICO 8|12DSP and Atomo
Products from the same category
Products from the same brand