Mosconi One 130.4 Amplifier 4 channels 4 ohms
Mosconi One 130.4 Amplifier 4 channels from 4 x 130 watts RMS to 4 ohms
- Description:
- - 130 watts per channel at 4 ohms
- 175 watts per channel at 2 ohms
- 350 watts at 4 ohm bridge
- Rated power (Ref. Nominal power): 0.35 V ÷ 16 V
- Crossover: high pass and low pass or OFF (20 ÷ 225 Hz)
- Slope - Filter Q: 12 dB / oct
- High level + Autosense, BTL: In high level operation (BTL amplifiers) no remote signal is needed!
- Dimensions: 310x200x50 mm
Mosconi One 130.4 Amplifier 4 channels from 4 x 130 watts RMS to 4 ohms
GLADEN ONE LINE
Very compact, analog full-Mosfet amplifier
Front Stage Adjuster FSA (similar to time correction)
High-level (33 ohm) input with automatic remote
Temperature controlled fan
Plug and Play wiring harnesses (optional)
90% Made in Italy
.
Technical specifications
Power:
130 watts per channel @ 4 ohms
175 watts per channel @ 2 ohms
350 watts bridged @ 4 ohms
Input sensitivity: (Power rating ref) 0.35 V ÷ 16 V
Crossover: high and low pass or OFF (20 ÷ 225 Hz)
G-CARD-SLOT 1x per channel pair
K1-2, K3-4: Can be used together with the built-in crossover to generate band-pass or 24 dB filters.
Edge steepness - filter quality: 12 dB / oct
High-Level + Autosense, BTL: In high-level operation (with BTL amplifiers) no remote signal is required!
Dimensions: 310x200x50 mm
ONE 130.4 - 4-channel power amplifier
Per channel pair: plug-in card for HP & LP, FSA RTC
…… or HOC e.g. BMW, Audi ........
HP and LP
AnalogDevice Ics
More power
With a G_HOC plug-in card, your MOSCONI amplifier becomes a vehicle-specific amplifier!
Positioning the stage in the middle (staging)
Level equalization left / right channel (balancing)
Adaptation to the vehicle acoustics (equalizing)
Customers who bought this product also bought:
Products from the same category
Products from the same brand