Nominal impedance is 4 ohm for WF118WA01 and 8 ohm for WF118WA02. Otherwise the two models are identical.
WF118WA01/02 are mid/woofers designed for demanding bass and midrange applications. It works equally well for high-end hi-fi, high quality home theater systems, and top multimedia setups.
Powered by a large 85mm magnet structure that ensures good efficiency and optimal T/S parameters.
The large 32mm voice coil ensures high power handling - thermally and mechanically
The optimized paper cone ensures large bandwidth and low distortion. Distortion is further reduced by efficient venting and an alu shorting ring stabilizing the magnetic field in the air gap.
WF118WA01/02 are excellent choices for very compact 2-way speaker systems or even as midrange in multi-way systems.
- Alu field-stabilizing ring inside magnet assembly for reduced distortion at high levels
- Vented voice coil former for reduced distortion and compression
- New vented chassis for lower air flow speed reducing audible distortion
- Voice coil wound with Copper Clad Aluminium Wire for higher efficiency and better dynamics
- Heavy-duty black fiber glass voice coil bobbin to increase power handling and reduce mechanical losses resulting in better dynamic performance and low-level details
- Large motor system with 1¼” voice coil diameter and 85mm magnet for better control and efficiency
- Black magnet parts for better heat transfer to increase power handling
- Long linear stroke motor for reduced distortion at high levels
- New progressive suspension with specially designed CONEX damper (spider) for long durability under extreme operating conditions
- Gold plated terminals to prevent oxidation for long-term reliable connection
Parameter
Value WF118WA01 / WF118WA02
Nominal size
4½
[inch.]
Nominal impedance
4 / 8
[ohm]
Recommended upper frequency limit
4
[kHz]
Recommended cabinet volume
2-4
[lit.]
Sensitivity, 2.83V/1m, (average 500-4,000Hz)
89 / 86
[dB]
Voice coil diameter
32.5
[mm]
Voice coil height
11
[mm]
Air gap height
5
[mm]
Voice coil resistance, RDC
3.2 / 6.3
[ohm]
Voice coil inductance (@10 kHz)
0.16 / 0.28
[mH]
Magnet weight
325
[g]
Effective radiating area, Sd
55
[sq.cm]
Power handling, continuous, IEC 268-5
50
[W]
Resonance freq., Fs
64 / 65
[Hz]
Moving mass, incl. air
6.2 / 6.0
[g]
Force factor, Bxl
4.6 / 5.8
[Tm]
Mechanical Q, Qm
8.8 / 8.6
-
Electrical Q, Qe
0.38 / 0.46
-
Total Q, Qt
0.36 / 0.44
-
Suspension compliance, Cms
1.0
[mm/N]
Equiv. air volume, Vas
4.3
[lit.]
Total unit net weight
0.95
[kg]
Products from the same category
Products from the same brand