MONACOR FGA-40MF Mass separation filter
Mass separator in small design, to avoid signal disturbances and ripple loops, Eg when connecting PC sound cards or notebooks to amplifiers
Galvanically isolated inputs and outputs
2 RCA connectors
2 RCA plugs
Input / output impedance 20 kΩ
Frequency range 20-20000 Hz
Distortion factor <0.01%
Transmission ratio 1: 1
Ø 24 mm x 38 mm, 32 g
Length including connection cable approx. 40 cm
Www.musicnstuff.de 07/2014
"There are many small helpers for studio, stage and domestic stereo system. A special feature of this is the Monacor with the FGA-40MF - a transmitter for unbalanced stereo line signals. With the FGA-40MF, Monacor has a small, uncomplicated tool to counter-measure the program. And, does it work? Sure, instead of using a normal stereo RCA cable, where there was no buzz before, nothing more - in both directions. By the way: Instead of using male and female RCA plugs, Monacor also offers models with only male plugs or - for computers and MP3 players - those with mini-jacks. "
Kind of mass separation filter
Frequency range 20-20000 Hz
Control range -
Rule frequencies -
Input signal -
Eingangsempfindlicheit -
Input impedance 20 kΩ
Output signal -
Output impedance 20 kΩ
gain -
Phantom power -
compression -
Gate Ratio -
Crossover -
High Pass Filter -
Low Cut -
Transmission ratio 1: 1
SNR -
Channel separation -
Distortion factor <0.01%
Perm. Operating temperature 0-40 ° C
Power supply -
Measurements Ø 24 mm x 38 mm
Weight 32 g
Inputs 1 x RCA connector L / R,
1 x Cinch coupling L / R
Outputs 1 x RCA plug L / R,
1 x Cinch coupling L / R
Others -
Products from the same category
Products from the same brand