- On sale!
- -10%
Wavecor TW030WA14 Tweeter neodymium 8 ohm
Wavecor TW030WA14 Tweeter neodymium 8 ohm
TW030WA13 and TW030WA14 are true high-end tweeters designed for the most demanding applications featuring an array of performance improving details that participate in obtaining low resonance frequency, low distortion and very high frequency extension
Wavecor TW030WA14 Tweeter neodymium 8 ohm
TW030WA13 and TW030WA14 are true high-end tweeters designed for the most demanding applications featuring an array of performance improving details that participate in obtaining low resonance frequency, low distortion and very high frequency extension
- Precision textile dome ensuring extended response and very good consistency
- 30 mm voice coil design with high power handling, and low resonance frequency
- Copper clad center pole yielding very low voice coil inductance for reduced distortion and increased high frequency output
- Vented through to a damped rear chamber for low resonance frequency and low distortion
- Internal volumes for low resonance frequency and low distortion
- Optimized dome shape for ultra high frequency cut-off
- Rear heat sink for increased long term power handling
- Vented voice coil former for reduced distortion and compression
- Copper-clad aluminium voice coil wire offering lower moving mass for improved efficiency and transient response
- Built-in cavities under dome/edge to equalize pressure - for lower distortion and lower resonance frequency
- Flexible lead wires for higher power handling and larger excursion
- Gold plated terminals to prevent oxidation and ensure long-term reliable connection
- Delivered with foam gasket attached for hassle-free mounting and secure cabinet sealing
.
Notes
Parameter
TW030WA13
TW030WA14
Unit
Nominal size
30
30
[mm]
Nominal impedance
4
8
[ohm]
Recommended frequency range
2 - 30
2 - 30
[kHz]
1, 4
Sensitivity, 2.83V/1m (average SPL in range 2 - 20 kHz)
93.5
90.5
[dB]
2
Power handling, short term, IEC 268-5, 2.5 kHz@12dB/oct.
[W]
2
Power handling, long term, IEC 268-5, 2.5 kHz@12dB/oct.
[W]
2
Power handling, continuous, IEC 268-5, 2.5 kHz@12dB/oct.
35
35
[W]
Effective radiating area, Sd
11.5
11.5
[sq.cm]
3, 4, 6
Resonance frequency (free air, no baffle), Fs
690
715
[Hz]
Moving mass, incl. air (free air, no baffle), Mms
0.43
0.40
[g]
3
Force factor, Bxl
1.95
2.25
[N/A]
3, 4, 6
Suspension compliance, Cms
0.124
0.124
[mm/N]
3, 4, 6
Equivalent air volume, Vas
23
23
[mlit.]
3, 4, 6
Mechanical resistance, Rms
0.76
0.76
[Ns/m]
3, 4, 6
Mechanical Q, Qms
2.45
2.37
[-]
3, 4, 6
Electrical Q, Qes
1.72
2.31
[-]
3, 4, 6
Total Q, Qts
1.01
1.17
[-]
4
Voice coil resistance, RDC
3.5
6.5
[ohm]
5
Voice coil inductance, Le(measured at 20 kHz)
33
59
[μH]
Voice coil inside diameter
30.4
30.4
[mm]
Voice coil winding height
1.7
1.7
[mm]
Air gap height
3.0
3.0
[mm]
Theoretical linear motor stroke, Xmax
±0.65
±0.65
[mm]
Magnet weight
[g]
Total unit net weight excl. packaging
0.13
0.13
[kg]
3, 4, 5
Krm
4.1
4.4
[mohm]
3, 4, 5
Erm
0.48
0.48
[-]
3, 4, 5
Kxm
197
726
[mH]
3, 4, 5
Exm
0.11
0.0
[-]
Products from the same category
Products from the same brand