JL Audio MHD600/4 - 24V AMPLIFIER 4 CHANNEL
JL Audio MHD600/4 - 24V AMPLIFIER 4 CHANNEL
JL Audio MHD600/4 - 24V AMPLIFIER 4 CHANNEL
JL Audio MHD600/4 - 24V AMPLIFIER 4 CHANNEL
    JL Audio MHD600/4 - 24V AMPLIFIER 4 CHANNEL
    JL Audio MHD600/4 - 24V AMPLIFIER 4 CHANNEL
    JL Audio MHD600/4 - 24V AMPLIFIER 4 CHANNEL
    JL Audio MHD600/4 - 24V AMPLIFIER 4 CHANNEL

    JL Audio MHD600/4 - 24V AMPLIFIER 4 CHANNEL

    SHIPMENT IN 7-10 WORKING DAYS
    €1,040.00
    Tax included
    rating No review at the moment

    JL Audio MHD600/4 - 24V AMPLIFIER 4 CHANNEL

    Estimated Shipping Costs
    Shipping Costs
    €19.20
    Shipping Time
    .
    Want to check another country or courier?

     

    For 24V systems only: 4-Channel Class D Marine Full-Range Amplifier, 150 W x 4 @ 1.5-4 Ω
    This compact, multi-channel powerhouse employs our Single-Cycle Control switching design and R.I.P.S. technology to deliver 150 W x 4 or 300 W x 2. Tight power supply regulation keeps distortion down and maximizes sound quality.

    The MHD600/4-24V is the ideal satellite amplifier, delivering huge dynamics with pristine resolution. It can also be deployed, on its own, as a very capable 3-channel system amplifier with 150W x 2 to the satellites and 300W x 1 to a subwoofer system.

    This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.

    This amplifier is designed for operation in vessels with 24 volt, negative-ground electrical systems. Use of this product in vessels with positive ground and/or voltages other than 24 V may result in damage to the product and will void the warranty.

    Rated Continuous (RMS) Power @ 14.4 V

    @ 4 Ω 150 W RMS x 4
    @ 3 Ω 150 W RMS x 4
    @ 2 Ω 150 W RMS x 4
    @ 1.5 Ω 150 W RMS x 4
    Bridged @ 8 Ω 300 W RMS x 2
    Bridged @ 4 Ω 300 W RMS x 2

     

    Rated Continuous (RMS) Power @ 12.5 V

    @ 4 Ω 150 W RMS x 4
    @ 3 Ω 150 W RMS x 4
    @ 2 Ω 150 W RMS x 4
    @ 1.5 Ω 150 W RMS x 4
    Bridged @ 8 Ω 300 W RMS x 2
    Bridged @ 4 Ω 300 W RMS x 2



    Frequency Response 6 Hz - 30 kHz (+0, -1dB)
    S/N Ratio, referred to highest rated power >110 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
    S/N Ratio, referred to 1 W >88.2 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
    Damping Factor @ 4 Ω >300 / 50 Hz
    Damping Factor @ 2 Ω >150 / 50 Hz
    THD+N @ Rated Power <0.03% @ 4 Ω per Ch.
    Input Voltage Range @ RCA Inputs Switchable from 200 mV - 2 V RMS to 800 mV - 8 V RMS
    Min Copper Power / Ground Wire Gauge 4 AWG wire
    Fuse Rating 50 A (AFS, AGU or MaxiFuse™)

     

    Signal Processing MHD600/4 - 24V

    Filter Modes Low-Pass or High-Pass
    Filter Slope (dB/Octave) 12 dB or 24 dB
    Filter Frequency Range 50-500 Hz
    Detented, Calibrated Filter Freq. Potentiometers Yes
    Filter Defeatable? Yes
    Remote Level Control Optional (HD-RLC)
    Remote Level Modes 2 or All Channels
    Channel Input Mode Switch Yes (2/4 ch.)
    Pass-Through Preamp Output Type Buffered
    Source Channel Selection for PreOuts Yes

     

    Dimensioni MHD600/4 - 24V

    Height (H) 1.93 in / 49 mm
    Width (W) 10.74 in / 273 mm
    Depth (D) 8.29 in / 211 mm

    4 Items

    You might also like

    Product added to wishlist
    Product added to compare.

    With our cookies offer you a simply and fast shopping experience.This remember you special offers and your preferences of navigation . If that is okay with you, you agree to the use of cookies for your preferences simply by clicking on "accept"

    By closing this banner, scrolling this page, clicking on a link or continuing to browse in any other way, you consent to the use of cookies.