Dayton Audio BSK2 Dual Bass Shaker Kit
Dayton Audio BSK2 Dual Bass Shaker Kit
Dayton Audio BSK2 Dual Bass Shaker Kit
Dayton Audio BSK2 Dual Bass Shaker Kit
    Dayton Audio BSK2 Dual Bass Shaker Kit
    Dayton Audio BSK2 Dual Bass Shaker Kit
    Dayton Audio BSK2 Dual Bass Shaker Kit
    Dayton Audio BSK2 Dual Bass Shaker Kit

    Dayton Audio BSK2 Dual Bass Shaker Kit

    Out-of-Stock
    €524.00
    Tax included
    rating No review at the moment

    Dayton Audio BSK2 Dual Bass Shaker Kit

    Dayton Audio’s BSK2 Dual Bass Shaker Kit is a perfect solution adding a 4th dimension of sensory experience to your home theater. Complete with the Dayton Audio BSA-200 200W amplifier, two Dayton Audio BST-1 50W bass shakers, and speaker wire, the kit has all of the components you need to start feeling what you’ve been missing.

    This kit can also be upgraded to add an additional 2x Dayton Audio BST-1 to bring the total to 4x BST-1 bass shakers.

    Estimated Shipping Costs
    Shipping Costs
    €18.00
    Shipping Time
    .
    Want to check another country or courier?

     

    Dayton Audio BSK2 Dual Bass Shaker Kit

    Dayton Audio’s BSK2 Dual Bass Shaker Kit is a perfect solution adding a 4th dimension of sensory experience to your home theater. Complete with the Dayton Audio BSA-200 200W amplifier, two Dayton Audio BST-1 50W bass shakers, and speaker wire, the kit has all of the components you need to start feeling what you’ve been missing.

    This kit can also be upgraded to add an additional 2x Dayton Audio BST-1 to bring the total to 4x BST-1 bass shakers.

    Description

    Powerful amplifier and bass shaker combo optimized to add earth shaking bass for movies, games, and music

    Two Dayton Audio BST-1 Pro tactile transducers, each can handle up to 100 watts max

    Dayton Audio BSA-200 amplifier with built in low pass filter provides plenty of power

    Built-in USB port for powering 5V devices or use with wireless Dayton Audio Wave-Link technology

    Includes two BST-1 50W bass shakers, BSA-200 200W amplifier, and speaker wire

    The human ear has the ability to hear a wide range of sounds. However, some sound is simply too low to hear and must be felt through the body. Feeling this extremely low frequency sound adds a new dimension to your listening, gaming, and movie experiences.

    With two Dayton Audio BST-1 Bass Shakers and the BSA-200 Amplifier this package will ensure that you will be able to feel everything from high impact explosions in movies to the subtle feel of road surfaces in racing simulators. Unlike subwoofers, the BST-1 Bass Shaker will not overload your listening area with offensive SPL levels. The two BST-1 Bass Shakers and a BSA-200 Amplifier package is perfect for adding powerful vibrations to a couch, two large chairs, or even a small raised platform.

    Dayton Audio designed the BST-1 Bass Shaker to reproduce accurate, tactile sensations from your music and movie sound tracks. When a BST-1 Bass Shaker is installed on a resonant surface, it increases the portion of tactile sound as being “felt” beyond what is normally produced by subwoofers and ordinary speakers. Conventional subwoofers are traditionally considered optimized when you can feel rather than hear the bass.

    A specially formulated nylon/fiber spider and the selection of quality hardware components allow the BST-1’s internal motor structure to not only outperform the competition but increase the product lifespan. Simply put, with a Dayton Audio BST-1 Bass Shaker you can count on years and years’ worth of amazing blasts, shakes, rolls, rattles, rumbles, thumps, bangs, and bumps!

    The BSA-200 amplifier is designed and built specifically to power tactile transducers. Its small form factor makes it perfect for tight spaces, while the included brackets allow for vertical or horizontal mounting. The frequency and balance knobs let you dial in the desired crossover point and output, giving you total control.

    The Dayton Audio BSA-200 is rated at 110 watts RMS per channel into 2 ohms. In bridged mono mode, both amplifier channels are combined for high-power monaural output. The amplifier is rated at 230 watts RMS into a single 4 ohm load when bridged.

    Manual and automatic on/off modes allow easy integration into automated systems and saves power when not in use. 5V USB power output is designed for use with the Dayton Audio Wave-Link wireless system (not included). The Wave-Link system can link up to five receivers per transmitter giving you ultimate flexibility with remote mounting options.

    BSA-200/BST-1 Specs

    BSA-200 Amplifier Specifications:

    • Output power: 110 watts RMS per channel @ 2 ohms, 230 watts RMS @ 4 ohms ( minimum impedance) bridged mono

    • Input sensitivity: 170 mV

    .• Frequency Response: 5-200 Hz +/- 3 dB

    • Variable low pass: 50-200 Hz

    • Total harmonic distortion ( stereo ): 1%, (mono): 0.05%

    • Signal to noise ratio: 91 dB @ 100 Hz A-weight

    • Power requirements: 110~240 VAC 50/60 Hz

    • Max power consumption: 313W

    • Stand-by power rating: 0.5W.

    • Auto turn-on sensitivity: 10 mV

    • Remote: wired ( 12ft. cable)

    • Dimensions: 2.5″ H x 9.5″ W x 8.5″ D.

    BST-1 Bass Shaker Specifications:

    • Housing: High grade aluminum

    • Frequency response: 10-80 Hz

    • Fs (unmounted): 30 Hz

    • Impedance: 4 Ohms

    • Power handling: 50 Watts RMS (each)

    • Weight: 1,7 kg

    • Dimensions: 5.75″ dia x 2.5″ H

    • Mounting holes 5.5625″ center to center.

    BSK2 Dual Bass Shaker Kit
    New product

    You might also like

    Product added to wishlist
    Product added to compare.

    With our cookies offer you a simply and fast shopping experience.This remember you special offers and your preferences of navigation . If that is okay with you, you agree to the use of cookies for your preferences simply by clicking on "accept"

    By closing this banner, scrolling this page, clicking on a link or continuing to browse in any other way, you consent to the use of cookies.