123ELECTRIC BMS123 Smart Gen3 - Set (4 Cells) With Bluetooth 4.0
123ELECTRIC BMS123 Smart Gen3 - Set (4 Cells) With Bluetooth 4.0
123ELECTRIC BMS123 Smart Gen3 - Set (4 Cells) With Bluetooth 4.0
123ELECTRIC BMS123 Smart Gen3 - Set (4 Cells) With Bluetooth 4.0
123ELECTRIC BMS123 Smart Gen3 - Set (4 Cells) With Bluetooth 4.0
    123ELECTRIC BMS123 Smart Gen3 - Set (4 Cells) With Bluetooth 4.0
    123ELECTRIC BMS123 Smart Gen3 - Set (4 Cells) With Bluetooth 4.0
    123ELECTRIC BMS123 Smart Gen3 - Set (4 Cells) With Bluetooth 4.0
    123ELECTRIC BMS123 Smart Gen3 - Set (4 Cells) With Bluetooth 4.0
    123ELECTRIC BMS123 Smart Gen3 - Set (4 Cells) With Bluetooth 4.0

    123ELECTRIC BMS123 Smart Gen3 - Set (4 Cells) With Bluetooth 4.0

    AVAIBLE ON ORDER
    €332.00
    Tax included
    rating No review at the moment

    123ELECTRIC BMS123 Smart Gen3 -  Set (4 Cells) With Bluetooth 4.0

    BMS123 Smart Gen 3 – a complete solution for LFP, LTO, NMC and Li-Ion cells to make battery with Bluetooth monitoring and management using your smart phone, iPad, tablet or other device.

    Estimated Shipping Costs
    Shipping Costs
    €18.00
    Shipping Time
    .
    Want to check another country or courier?

     

    123ELECTRIC BMS123 Smart Gen3 -  Set (4 Cells) With Bluetooth 4.0

    A new upgraded advanced solution for battery monitoring and management system with LFP/LTO support and Bluetooth battery management.

    .

    LTO compatible, Operates on cell voltages between 1.5V and 5.0V

    High accuracy SOC, dual range current sensors to measure a wide range of currents up to 50

    Error history to see when, what cell and which error occurred.

    SOC logging of the last week.

    More accurate temperature measurement near cell pole

    Over the air firmware update

    Easier configuration

    -

    Simple installation, easy settings, smart operation and maximum protection!

    -

    The  BMS123 Smart is a fully modular system. Each cell of the battery equipped with one small size circuit-board. There are three types of cell circuit-boards needed for the installation. One Begin board installed on the first cell, One End board installed on the last cell and a regular cell board on each cell between the first and the last cell.

    For a battery pack made of 4 cells (12V) you need only one Begin, one End module and two regular cell modules.

    For a larger size battery packs (24V, 48V, etc) you just start with the Complete Set (of 4 cells) and you simply purchase additional number of the regular cell modules to install on additional cells in between the first and the last cell. It is easy to make a complete system for any number of cells!

    Example of the configuration of the battery packs:

    24V pack (with 8 pcs LiFePO4 cells): GWL/Power BMS123 Smart - Complete Set has 4 cells (1x First IN, 1x Last OUT, 2x Single CM) for additional 4 cells just buy 4 more Single Cell Modules (CM).

    48V pack (with 16 pcs LiFePO4 cells): ): GWL/Power BMS123 Smart - Complete Set has 4 cells (1x First IN, 1x Last OUT, 2x Single CM) for additional 12 cells just buy 12 more Single Cell Modules (CM).

    Example of the configuration 2P4S (ex. 12V (2x100Ah)) battery packs:

    For this installation you need again only 12V BMS set. Two cells in parallel are still just one cell.

    Schermata 2023-01-07 alle 16-11-56.png

    BMS123 Smart Application

    Simple installation right at the cell level

    BMS123 Smart is really Smart: There is no Main Controller Unit for this BMS system! Everything is integrated at the cell modules directly. The IN and OUR cell modules contain all the hardware components for the basic operation of the whole BMS system. Additionally the OUT cell module gathers all relevant data and transmits them via Bluetooth 4.0 LE (low consumption) to your iOS or Android Tablet of Phone.

    The Access to information about your battery pack was never easier. Monitor everything remotely, including daily PV production, daily energy consumption, or for example voltage of all cells at the single screen. Have complete overview of your home energy storage at you Smartphone or tablet!

    Smart advantages of the  BMS123

    • Small size board installed directly at the terminals of each cell
    • Single wire communication. Easy to assemble the battery pack
    • Simple wiring design of the whole system designed for energy storage markets
    • No additional Main Controller unit
    • No external battery is needed for operation; the BMS is powered directly from the battery pack
    • Detailed monitoring and balancing function for each cell independently
    • Check the status of all cells at single screen
    • Excellent pricing ratio: robust and reliable system at very competitive price
    • Adjustable integrated bi-stable low power relays allowing you to disconnect charger and load at predefined levels
    • Optional Free iOS or Android based software to get the extended monitoring dash-board

    App Download

    BMS123
    20 Items

    You might also like

    Product added to wishlist
    Product added to compare.

    With our cookies offer you a simply and fast shopping experience.This remember you special offers and your preferences of navigation . If that is okay with you, you agree to the use of cookies for your preferences simply by clicking on "accept"

    By closing this banner, scrolling this page, clicking on a link or continuing to browse in any other way, you consent to the use of cookies.