WONDOM AA-AB32195 KIT1 - 2x300W T-AMP + Volume Control
WONDOM AA-AB32195 KIT1 - 2x300W T-AMP + Volume Control
WONDOM AA-AB32195 KIT1 - 2x300W T-AMP + Volume Control
WONDOM AA-AB32195 KIT1 - 2x300W T-AMP + Volume Control
WONDOM AA-AB32195 KIT1 - 2x300W T-AMP + Volume Control
    WONDOM AA-AB32195 KIT1 - 2x300W T-AMP + Volume Control
    WONDOM AA-AB32195 KIT1 - 2x300W T-AMP + Volume Control
    WONDOM AA-AB32195 KIT1 - 2x300W T-AMP + Volume Control
    WONDOM AA-AB32195 KIT1 - 2x300W T-AMP + Volume Control
    WONDOM AA-AB32195 KIT1 - 2x300W T-AMP + Volume Control

    WONDOM AA-AB32195 KIT1 - 2x300W T-AMP + Volume Control

    Out-of-Stock
    €70.00
    Tax included
    rating No review at the moment

    WONDOM AA-AB32195 KIT1 - 2x300W T-AMP +  Volume Control

    This audio amplifier board uses Sure Electronics' T-AMP technology, characterized by low distortion and low noise level. Listen to your music like never before with 300 Watts per channel of Tripath Class-T technology on an audiophile level. The amplifier includes a silent fan for heat dissipation.

    Estimated Shipping Costs
    Shipping Costs
    €15.00
    Shipping Time
    .
    Want to check another country or courier?

     

    WONDOM AA-AB32195 KIT1 - 2x300W T-AMP +  Volume Control

    This audio amplifier board uses Sure Electronics' T-AMP technology, characterized by low distortion and low noise level. Listen to your music like never before with 300 Watts per channel of Tripath Class-T technology on an audiophile level. The amplifier includes a silent fan for heat dissipation.

    This amplifier board supports stereo (double) amplification using the two-channel PBTL topology. Thanks to the dedicated heat sink design with temperature controlled fan, it is capable of delivering maximum dual channel power from 300 W RMS to 3 ohms simultaneously without an extraordinary heat sink. In addition to the integrated protection of the chip, the protection components against ESD discharges and used throughout the input and output of the amplifier board guarantee its robustness and reliability.

    This amplifier board supports mono amplification using the PBTL topology. The fan works when the heat sink temperature reaches 45 degrees Celsius and stops when the temperature drops to 40 degrees Celsius. Therefore the audible noise and the loss of inactive power carried by the fan could be omitted when the output RMS power is moderate. Recommended power supply: ALC24V6AJ.

    Dettaglio di connessione amplificatore in classe D AA-AB32195

    Features AA-AB32195 

    Parametri Condizioni di TestValori
    Corrente massima600 W @ 3 Ohm14.2 UN
    Tensioni di Alimentazione -15-40 V
    Efficienza300 W @ 3 Ohm86-91 %
    Potenza Inattiva

    SD Floating, FAN ON 

    SD Floating, FAN OFF

    9.6-18 W

    8-15 W

    Frequenza SwhitchingSD Floating674 kHz
    Potenza in StandbySD collegato a GND, FAN OFF0.8-5 W
    Sensibilità  di ingresso (RMS)@ 3 Ω, 300 W, 1 KHz917 mV
    Impedenza di ingresso-33 KΩ
    Guadagno-26-30 dB
    Impedenza di carico minima-3 Ω
    Potenza in uscita

    @ 3 Ω THD + N 1%

    @ 3 Ω THD + N 10%

    206 W

    300 W

    Larghezza di banda @ ± 3dB@ 3 Ω20-20K Hz
    THD

    @ 3 Ω, 1W, 1KHz

    @ 3 Ω, 10W, 1KHz

    0.0052 %

    0.025 %

    Livello di rumore in uscitaPonderazione, Ingresso collegato a GND209 mV
    SNR206 W @ 3 Ω THD + N 1%94.8 dB
    Temperature
    -50 °C

    Features AA-AB32195

    ParametriSpecifiche
    ChipT-AMP
    Dimensioni12,1 x 9,1 x 3,8 cm.
    Potenza2 x 300W
    Classe AmplificatoreD
    Controllo di volume Opzionale
    Protezione da cortocircuitiSi
    Protezione da sovratemperaturaSi

    Technical Characteristics Volume Control AA-AA11117


    The AA-AA11117 Digital Volume Control is specially designed for audio amplifier board. Flexible and easy to install connection, also thanks to a 20 cm cable. It has a single-end audio signal input and output, an LED status indicator and a similar DIP module for plug in play.

    Parameters Specific Conditions
    Chip - PT2259
    Power supply - 5V DC
    Quiescent current - 10 mA
    THD F = 1kHz, Vo = 0.5Vrms, ATT = 0 0.01 / 0.05%
    Maximum input voltage THD = 1%, ATT = -6dB 1.5 / 1.7 vrms
    Maximum output voltage THD = 1% 0.8 / 1.3 vrms
    Operating temperature - 20-50 ° C
    Storage temperature - -20-105 ° C
    Thermal temperature - 150 ° C
    Volume Control Board Dimensions - 1.1 "x 0.9"
    Decode Board Dimensions
    - 2 "x 1.5" x 1.7 "

    WONDOM AA-AB32195 KIT1

    You might also like

    Product added to wishlist
    Product added to compare.

    With our cookies offer you a simply and fast shopping experience.This remember you special offers and your preferences of navigation . If that is okay with you, you agree to the use of cookies for your preferences simply by clicking on "accept"

    By closing this banner, scrolling this page, clicking on a link or continuing to browse in any other way, you consent to the use of cookies.