WONDOM AA-JA32172 - 2x50W Class D Amplifier with DSP Audio

WONDOM AA-JA32172 - 2x50W Class D Amplifier with DSP Audio

ADAU1707 DSP integrated audio, PBTL configurable. Completely compatible with JAB1 and JAB2. Amplifier for headphone. Integrated debug port for Sigma Studio through original USB or WONDOM programmer, ICP1 / ICP2. External control interrupter door and Bass tension interruption programming door.

Fast installation

During the practical installation of the Jukebox / kiosk power supply, there will be several minutes to complete the connection and debug in the ultimate assembly and test phase. Dietary regimens and potential problems are found in many aspects of functioning, such as the inversion of the polarity of the feed, the correct multichannel ordinances, the regulation of the volume of the canal, the disconnection of the canal of the signal caused by the damaged contact and cosine . To resolve issues such as mentioning and improving the frequency and frequency of effective testing, we use various forms of connectors for power connections, alloplastic colleges, signal ingress and power meter connections. For example, the Micro-Fit molex 2CKT vertical intestines, the upper intestinal type JC PHST 4CKT / 6CKT type intestines are popular in JAB for a reconciliation facility. In addition, we have also provided extension cords for various connectors, which can easily distinguish one from another with various colors. We will not attempt to compromise on the connection and debugging of the data and will not have to pay for installation and debugging.

High quality of suono

In addition to low power consumption, Sure Electronics offers high quality so-called high speed. Everything is without a high quality of sound. We can obtain a lower frequency response to ± 3dB on the AUX channel, which is the Bluetooth channel APT-X is capable of. For the better part of the Sure Electronics audio amplifiers, it is possible to obtain around 90dB or more SNR distortion of 0.01% when emitting a 1Watt modality. PBTL (Mono) Confi gurabili. The amplifier shafts of the JAB series support the Parallel Bridge Tied Load modality, in which case they are called together as a channel. In PBTL (mono) modality, one of the two intrusions can function as an intruder connector. If the audio signal is transmitted through a frame and due to ingress, the output is lost. Collect all the positive and negative things for the best efficiency. For the configuration of the PBTL modality, we will charge 500 pieces MOQ.

Compatible with JAB1 / 2

JAB1 and JAB2 provide a stereo solution for high-performance Bluetooth portable with MPPT battery charger. In addition to the amplifier for the case, JAB3 also provides a flexible DSP solution. This means that when working with the JED1 / 2 main shredder, it provides a complete audio system 4.0 (BTL), 2.1 and 0.2 (PBTL) with control and elaboration interface of the signal. The space application of loud speaker speakers (digital unit in 3 lives 3, crossover in 2 lives 2 units, bass optimization, ecc.) And realizes the transformation from 2.0 to 2.1 (used with JAB2). With four potentiometers, customers can obtain the predefined function and adjust the volume of audio input, guadagno, frequency of cut-o-ff of bass and acutely. Customers can browse JAB3 with JAB1 / 2 through JST-PH-6PIN connectors on board.

Adaptive power supply module for RV / Yacht applications

If your projects are powered by RV or Yacht battery system, we can supply the additional power supply that always emits DC 24V when the input voltage is not lower than 10 V and is not higher than 40 V. The power module is in 100 W continuous charge and 200 W with fine efficiency up to 85%, which is suitable for audio power amplification applications. * The range of power supplies of the JAB3 series is 12-24 V, typically 19V.

DSP integration

With the integrated debug port of Sigima Studio, customers can pre-program with Sure Electronics ICP1, ICP2 or the original USB analogue to obtain more functions that include equalization, crossover, bass optimization, dynamic bandwidth elaboration, ritual compensation ecc. DSP ADAU1701 programmable audio at 28/56 bit from analog device is competent in various signal elaboration applications. This process can compensate for the limitations of the real world of high-performance, amplifiers and listening ambitions, providing significant improvements in perceived audio quality. The largest part of the process comes in high-precision modeling to 56 bit, giving the best performance of the signal at low level. Due to the ADC Σ-Δ and four DAC Σ-Δ integrated in this DSP supply an analog input of 98.5 dB to the dynamics of the analog output. Ogni ADC ha un THD + N di -83 dB, e og

Staff in Alluminio tipo L (Optional)

It is difficult to assemble the audio amplifier schedule in a single space as the largest part of the Kiosk and Jukebox applications. To improve connection and failure efficiency and cost savings from installations, Sure Electronics offers a staff in aluminum type L for the JAB series. The lighting staff supports the vertical and horizontal installation modes to suit the various installation requirements. With 4 M3 speed controllers and 2 M3 prefabricated mounting brackets, the audio amplifier stage of the JAB series can be easily installed on the staff.