Hypex FA253 2 x 250 + 100 Watt FusionAmp
Hypex FA253 2 x 250 + 100 Watt FusionAmp
    Hypex FA253 2 x 250 + 100 Watt FusionAmp
    Hypex FA253 2 x 250 + 100 Watt FusionAmp

    Hypex FA253 2 x 250 + 100 Watt FusionAmp

    SHIPMENT IN 5/7 WORKING DAYS
    €540.83
    rating No review at the moment

    Hypex FA253 2 x 250 + 100 Watt FusionAmp

    The FA253 2x250 +100 Watt FusionAmp is a DSP controlled three channel plate amplifier. It can be the basis of a powerful active two- or three-way speaker.

    Estimated Shipping Costs
    Shipping Costs
    €99.00
    Shipping Time
    .
    Want to check another country or courier?

     

    Hypex FA253 2 x 250 + 100 Watt FusionAmp

    The FA253 2x250 +100 Watt FusionAmp is a DSP controlled three channel plate amplifier. It can be the basis of a powerful active two- or three-way speaker.

    Highlights

    • Ncore based amplifier technology
    • DSP controlled
    • All-in-one Hypex Solution
    • Neutral and transparent reproduction

    Product Details

    Hypex FA253 2x250 +100 Watt FusionAmp 

    Due the combination of SMPS, DSP and Ncore based amplifiers packed in this plate amplifier, FusionAmp is one of the best amplification solutions available for active speaker designs. The integrated DSP provides great audio processing functionality. Thanks to the Ncore technology distortion (THD and IMD) over the full audio and power range is negligible. Distortion at listening levels (1W) is unmeasurable.

    The FA253 has two 250 watt Ncore amplifiers which can also be bridged to form one powerful 500 watt amplifier. The third channel is 100 watt Ncore tweeter channel. A variety of input options ensure compatibility with most source equipment. Hypex provides their HFD (Hypex Filter Design) software to design and configure filters for the FusionAmp. You can easily add functionality to the FusionAmp with the Fusion Remote Kit for remote controllability. Due to thermal regulation these FusionAmp's are not airtight.

    To protect your valuable drivers, the DSP does not contain a filter out of the box. A filter needs to be configured and uploaded using Hypex Filter design (HFD) software before the FusionAmp will produce an output signal. You can download the HFD software here. 

    Features

    • 15 biquads per amplifier
    • Three selectable presets for filters
    • Source selection
    • Signal detect
    • Auto shutdown
    • BTL capable
    • Clip protect
    • Thermal protect
    • Filter protection 

    What’s in the box?

    • FA253 FusioAmp
    • A printed copy of the user guide

    Spezifikationen für: FA253 2 x 250 + 100 Watt FusionAmp

    • Rated power output (RMS)2 x 250 + 1 x 100 watts at 4 ohms

      2 x 200 + 1 x 100 watts at 8 ohms
      2 x 180 watts at 2 ohms + 1 x 100 at 4 ohms

    • Bridged rated power output (RMS)1 x 400 at 4 ohms

      1 x 500 at 8 ohms

    • Minimum load2 ohms (4 ohms for tweeter channel)
    • Signal-to-noise ratio (SNR)121 dB
    • Distortion0.0015 % THD+N (10-20,000 Hz at 0.5 x rated power output)
    • Distortion bridged -
    • Amplifier classification Class D
    • Circuit topology Ncore®
    • Efficiency 92 % at full power
    • Frequency response 10 - 50,000 Hz
    • Input impedance

      54k ohms (unbalanced RCA)
      44k ohms (balanced XLR DM)
      2.2m ohms (balanced XLR CM)

    • Input sensitivity 1.66 Vrms for rated power output
    • Auto turn-on sensitivity -
    • DSP
    • DAC
    • Maximum sampling rate

      192 kHz
      96 kHz (optical)

    • Speaker output channels 3
    • Analog in/out 1/1
    • S/PDIF in/out 2/1
    • AES/EBU in/out 1/1
    • Coaxial in/out 1/1
    • RCA in/out 1/ -
    • XLR in/out 2/2
    • Jack in/out - / -
    • USB connection configure port only
    • Network connection -
    • Bluetooth -
    • Subwoofer pre-out -
    • Auto on/off
    • Remote control Sold separately
    • App control -
    • Equalizer (EQ) adjustment
    • Equalizer (EQ) profiles
    • Phase control
    • Crossover frequency adjustment
    • Presets
    • Control software Hypex Filter Design
    • Windows/Mac compatible / -
    • Power requirements 200-240 VAC ±10%
    • Power inlet connector IEC C14
    • Standby power consumption -
    • Current limit 17.5 A
    • Under/over voltage protection
    • Dimensions (H x W x D) 360 x 135 x 55 mm
    • Cutout dimensions 336 x 111 mm
    FA253
    8 Items

    You might also like

    Customers who bought this product also bought:

    Product added to wishlist
    Product added to compare.

    With our cookies offer you a simply and fast shopping experience.This remember you special offers and your preferences of navigation . If that is okay with you, you agree to the use of cookies for your preferences simply by clicking on "accept"

    By closing this banner, scrolling this page, clicking on a link or continuing to browse in any other way, you consent to the use of cookies.