- On sale!
Wavecor WF182BD12 bass midrange 17 cm 8 ohm
Wavecor WF182BD12 bass midrange 18 cm 4 ohm
The 7” transducers WF182BD09 and WF182BD11 (both 4 ohm) and WF182BD10 and WF182BD12 (both 8 ohm) were designed as high performance bass and midrange units for monitors and high-end hi-fi speakers. They offer outstanding deep bass performance and dynamic and detailed midrange.
- Product Specifications
- Nominal Diameter 7 "
- Power Handling (RMS) 80 Watts
- Power Handling (MAX) 160 Watts
- Impedance 8Ω
- Frequency Response 29 to 2,500Hz
- Sensitivity 86dB 2.83V / 1m
- Voice Coil Diameter 1.54 "
The 7” transducers WF182BD09 and WF182BD11 (both 4 ohm) and WF182BD10 and WF182BD12 (both 8 ohm) were designed as high performance bass and midrange units for monitors and high-end hi-fi speakers. They offer outstanding deep bass performance and dynamic and detailed midrange.
Product Details
Brand Wavecor
Model WF182BD12
Part Number 298-1210
UPC 848864055060
Unit of Measure Each
Weight 4.95
Product Specifications
Nominal Diameter 7"
Power Handling (RMS) 80 Watts
Power Handling (MAX) 160 Watts
Impedance 8Ω
Frequency Response 29 to 2,500Hz
Sensitivity 86dB 2.83V/1m
Voice Coil Diameter 1.54"
Thiele-Small Parameters
Resonant Frequency (Fs) 29.5Hz
DC Resistance (Re) 6.4Ω
Voice Coil Inductance (Le) 0.17mH
Mechanical Q (Qms) 8.8
Electromagnetic Q (Qes) 0.38
Total Q (Qts) 0.37
Compliance Equivalent Volume (Vas) 1.14ft³
Mechanical Compliance of Suspension (Cms) 1.33mm/N
BL Product (BL) 8.2T·m
Diaphragm Mass Inc. Airload (Mms) 21.9g
Maximum Linear Excursion (Xmax) 5.5mm
Surface Area of Cone (Sd) 131cm²
Materials of Construction
Cone Material Paper / Glass Fiber
Voice Coil Wire Material Copper
Voice Coil Former Fiberglass
Basket / Frame Material Cast Aluminum
Mounting Information
Overall Outside Diameter 7.17"
Baffle Cutout Diameter 6.02"
Depth 3.23"
# Mounting Holes 6
Optimum Cabinet Size (determined using BassBox 6 Pro High Fidelity suggestion)
Sealed Volume 0.235ft³
Sealed F3 68.91Hz
Vented Volume 0.636ft³
Vented F3 38.35Hz
- Balanced Drive motor structure for optimal drive force symmetry resulting in largely reduced even order harmonic distortion
- Copper cap on center pole to reduce voice coil inductance and to minimize variations in voice coil inductance as a function of voice coil position
- Cone made of a new paper/glass fiber mix with improved consistency and stability
- Rigid die cast alu chassis with extensive venting for lower air flow speed reducing audible distortion
- Vented voice coil former for reduced distortion and compression
- Vented center pole with dual flares for reduced noise level at large cone excursions
- Heavy-duty black fiber glass voice coil former to reduce mechanical losses resulting in better dynamic performance and low-level details
- Large motor with 1½” voice coil diameter for better control and power handling
- Built-in alu field-stabilizing ring for reduced distortion at high levels
- Low-loss suspension (high Qm) for better reproduction of details and dynamics
- Black motor parts for better heat transfer to the surrounding air
- Conex spider for better durability under extreme conditions
- Gold plated terminals to ensure long-term trouble free connection
Products from the same category
Products from the same brand